CAUTION ! only 4 Seats for SCRAM AFRICA 2013

if you want to come here .....


there are only 4 places for the second SCRAM AFRICA !



renseignements et contacts 

 http://www.fuelmotorcycles.eu/

Scram Africa advert from Fuel Bespoke Motorcycles on Vimeo.

Marco Melandri on top on final day of testing at Jerez

On the second and final day of World Superbike testing at Jerez de La Frontera, the rain that had hampered testing from last Saturday to Monday as expected finally left the Andalucian track and the teams were finally able to get in a decent day of work, before heading to Phillip Island next month for another two test sessions (February 14-15 and February 20-21) ahead of the first round of the 2013 season scheduled for February 24th.

Marco Melandri with his 63 laps rose to the top of the timesheets and stopped the clock in 1’40″758, a little more than a tenth of a second of second faster (0.103s) than Davide Giuliano on his second day with the Aprilia RSV4 - who was fastest yesterday in the wet - and the two Italians were the only riders to lap under the 1.41 barrier.

Aprilia factory rider Eugene Laverty was third fatest even though he suffered a harmless crash as did his new team mate Sylvain Guintoli who concluded the test in 6th behind Suzuki’s Leon Camier and Pata Honda’s Jonathan Rea (yesterday Pata Honda had electronic issues). BMW Italia’s new rider Chaz Davies was 7th and almost a second off pace from Melandri, while further down on the charts were Leon Haslam (+1.653) and Jules Cluzel (1.877) and debuting Ivan Clementi who more than 4 seconds off pace with his satellite BMW.

Just like yesterday, Kawasaki’s Tom Sykes and Loris Baz didn’t use transponders, but apparently Sykes was lapping in the low 1.40s.

WSBK Jerez day 2 results:

1. Marco Melandri – 1’40.758
2. Davide Giugliano – – 1’40.862
3. Eugene Laverty – 1’41.043
4. Leon Camier – 1’41.183
5. Jonathan Rea – 1’41.641
6. Sylvain Guintoli – 1’41.683
7. Chaz Davies – 1’41.727
8. Leon Haslam - 1’42.410
9. Jules Cluzel – 1’42.636
10. Ivan Clementi – 1’44.857

with TWOWHEELSBLOG

Kaw-ster Cafe Racer from Slovakia by Roman Juris

Kaw-ster cafe racer from Roman Juris of Slovakia

ZR7 used as the base for the build

The Kneeslider is fortunate to have a lot of readers from all over the world and sometimes they send us photos about a motorcycle they've built, but, though the information is all there, I have to rely on Google translate to sort it all out, and that's what I was working with here, a Kawasaki ZR7 based cafe racer from builder Roman Juris of Slovakia. Translation difficulties aside, it's a beauty.

Everything was disassembled, the rear sub frame was redesigned and rebuilt and now mounts a new cafe racer style tail section, the standard front forks were replaced with inverted forks from a Monster, the single sided swingarm, likewise, is Monster sourced and replaces the standard Kawasaki unit. The seat, so often an afterthought on cafe racers, where the builder glues on a thin slab of foam, is instead a gorgeous work of brown upholstery that fits the tail section perfectly.

Not the usual cafe racer slab of foam

The paint scheme, strongly resembles the Ala-Verda, a beautiful British Racing Green and gold pinstripe combination that complements the build.

Kaw-ster cafe racer ready for body work

The Kaw-ster is definitely very well executed and the result of Roman's work is a classic cafe racer with the right stance and obvious good looks. Nice work, Roman!

Link: Motoride SK

Kaw-ster cafe racer from Roman Juris of Slovakia

via thekneeslider

BMW Cafe Racer #4

BMW Cafe Racer #4 from Carlos Faustino on Vimeo.

Classic car garage, @Speed Garage, Thailand - XCAR

We look at some classic cars that have found a home in Thailand.

ATJ Project's '83 Honda CB400 Café Racer

I'm here to tell you something that I now know beyond a shadow of a doubt. ATJ Project's main man, Adam Jasiński, is one persistent, determined son-of-a-bitch. Looking back through the records, he first contacted us in early September of 2012 with photos of a bike he'd just finished. We liked it and asked if he could get us some decent photos of. He said yes, and then spent the next five months battling with cameras, lights, SD cards and our tachyon-sized attention spans trying desperately to impress us. I swear at one point I actually forgot who he was and introduced myself to him a second time. But he soldiered on and on and on until finally, when the moon was aligned in the third house of Sagittarius and an albino dog in China barked three times, he managed to wow us with the photos you see before you. Adam, I'm here to say thanks. Thanks for persisting. And thanks for putting up with our fussiness. If you're in Poland and looking for a custom bike, I can guarantee you this is the guy that will go the extra mile. Or month, as the case may be...

Here's Adam - and not a moment too soon. “A few words about us first. I am Polish and came from a family with a strong motorbike history. Everything was started by my father (again with the Dads - Andrew). He was a four-time Motocross champion in my country. So bikes were always in our garage. My older brother Tom and me started our adventure on 2 wheels when we were only 6 or 7 years old. Now I can say that we love really vintage bikes.” 

“One day we saw a café racer in a movie, and this was the moment when we decided to try and make such a bike. We bought a destroyed Honda CB400, disassembled it, cut the frame, hand made the seat, painted the tank etc. Finally the project turned out very good. Then came second bike, a Yamaha XS650, and a third...”

Note the detailing on the rear-view mirror

“Here's a few words about bike. It's a Honda CB 400 from 1983. We have painted it in a "Gulf" style. The frame is cut, the rear is converted to café, and painted silver. We hand made the seat with blue thread, the boards (not sure if he means the pegs or the heat shields - Andrew), and the rear fender which is trimmed in brown leather. The tires are modern street ones, and the exhaust is straight-through.”

Cool beyond a shadow of a doubt

“We made a Facebook fanpage. We put news, style photos, our ideas, and new projects up there. Maybe in the next year we would like to try make ATJ-Project our latest local business.”

“A few days ago we bought 3 honda CB400s and a Yamaha DT250 from 1978, so in 2-3 months we will have lots of new projects. We can't wait for the spring to start built bikes. Thanks for looking.”

via PIPEBURN

The 'Hippie' Porsche 917-021

Only just eclipsed by the marque’s first-ever victory at Le Mans, a sensation of the 1970 24-hour race was Martini Racing’s psychedelic long-tail Porsche 917. So popular was the purple/green/white car that other race organisers said: “Please bring us the hippie”... 

‘Porsche 917-021’, the subject of a new book by Jacques Breuer and Raymond Collignon, tells the story of the other 'hippie' Porsche 917K, its time racing in the 1970 World Championship of Makes and subsequent life as a road (!) and historic racing car.
In recent years, it has been painstakingly restored by Mecauto (as you can see below) for current owner Vincent Gaye. With a brand-new chassis, rebuilt engine and dazzling Martini & Rossi paint scheme, 917-021 returned to La Sarthe for the 2012 Le Mans Classic.
Turning the clock back to 1970, it was Martini Racing’s Hans-Dieter Dechent who offered ‘his’ (actually a factory car) 917-043 for Porsche’s recently appointed designer, Anatole Lapine, to decorate.


Departing from the planned white-with-red ‘script’, Lapine penned the swirling ‘hippie’ design, first laying purple and then matt fluorescent green on factory-fresh white Porsche paintwork. The work was completed over the Le Mans week, using some 1,500 spray cans.
“When it was finished, nobody could move their index fingers any more,” recalled Dechent. Porsche’s Ferdinand Piëch, the man behind the 917 project, was less impressed. “You know, a race car just has to be white,” he remarked drily.


Weeks later, the organisers of the Watkins Glen Six Hours wanted their own ‘hippie’ 917. With the works Le Mans long-tail back at Stuttgart, Martini Racing took over the Finnish AAW team’s 917-021 Kurz and the Franco-Dutch pairing of Larrousse and Van Lennep (below) raced in ‘hippie’ colours to ninth place one day, sixth the next. It was subsequently repainted yellow/red in another psychedelic design, this time for AAW’s long-term sponsor Shell.

You can see from the photographs how accurately the restorers followed the original. And this car remains the sole original ‘hippie’ 917, as the factoryLangheck 917-043 was converted to a 1971-spec car for the Gulf racing team’s Le Mans entry and subsequently scrapped by a ruthless Porsche management.


Scrapped?! Man, it’s enough to make you cry.

Related Links Porsches in the Classic Driver Marketplace The brilliant 'Porsche 917-021' book (95 euros + postage) produced by Jacques Breuer and Raymond Collignon: www.917-021.com Mecauto: ww.mec-auto.com

Text: Steve Wakefield(ClassicDriver)
Photos: 'Porsche 917-021' - Strictly Copyright 

Harley Davidson and Bell & Ross Nascafe Racer Bike

5

Shaw Harley-Davidson and Bell & Ross have joined talents and expertise to create the beautiful Nascafe Racer Bike. Based on the Harley-Davidson FXSTB Softail Nightrain, the motorcycle has been completely stripped down and rebuilt by the famousHarley-Davison dealership in Sussex, and the final result is just amazing.

Features of this beautiful bike is a custom paint job in a combination of anodised blue, carbon and stealth matte black just like the corresponding timepiece and the Bell & Ross watch mounted in a handcrafted center using a machined section of aluminum.

While we never would have thought that Bell & Ross and Harley-Davidson would go hand-in-hand, given the segments to which their clientele belongs, we do applaud both American brands for the collaboration, if only to show that a hardcore-performance bike like Harley-Davidson and a luxury American timepiece like Bell & Ross can strike a partnership and create a one-of-a-kind ride.

via bikeglam

Blitz Customs x Edwin Denim Co

DS3 SUPERCAR: LIKE BEING THROWN OUT OF A PLANE… ONLY FASTER

We feature a lot of cars here on Speedhunters that are quick – or at least have the promise of speed due to big horsepower numbers, outrageous body kits or some other product or part that infers performance. But there are some cars that just deliver, without any histrionics or showing off, and require you to redefine your concept of quick. This DS3 rallycross Supercar is one of them. It has more mechanical traction than most cars you’ll ever see, and sometimes it’s not about what your top speed is but how you get there. Liam Doran’s Monster Energy Citroën DS3 Rallycross car gets there faster than your eyes can keep up with, and in more outrageous style than should be legal.

The reason this modest French hatchback is such a car is due to a number of factors, but a simple way to think about it is to take on board a basic fact: this DS3 gets from zero to 60mph quicker than a Formula 1 car. And it’s designed to do that on a surface which can be optimistically described as loose, and in reality is often more mud-bath than racetrack.

A mutant hybrid of a highly developed World Rally Championship car, a drag racer and a tank, a rallycross Supercar is a schizophrenic beast. Throughout the sport’s forty-plus year history rallycross has ingested both cutting-edge rally cars and homebrew specials, spitting them back out as brutally over-powered behemoths.

Rallycross cars are built around a basic principle: survival. The closest analogy I can think of is that of an A10 Warthog tank-buster ‘plane, built to take untold numbers of hits and frightening amounts of battle damage, but at the same time to remain functional and capable of completing the mission. That’s why rallycross cars go from a pristine condition pre-race to looking like they’ve been blown up in the space of four minutes – and still finish. They cannot be destroyed. (Except by someone putting in a stupidly long jump with concrete supports, perhaps).

The aero might look good – but plays little part in the proceedings. It’s what’s happening under the hood that counts.

The best way to understand the insane power of a rallycross Supercar is, as with so many disciplines, to see one race – and especially to witness a start. If your neck can take it. That’s where the ferocity is plain to see. Imagine half a dozen or more of these things, straining on the limiters, exhausts popping and crackling, waiting for the lights to go out. And when they do, it’s like time has been speeded up. They are gone. Disappeared. Already 100 yards up the road, bumping and boring into the first corner whilst likely already dealing with a surface change from loose to looser.

Rallycross was a sport that was huge in Europe in the 1980s and early 1990s, a staple of Saturday afternoons on mainstream TV in the UK, with its wham-bam competition and short, sharp shock races. It made – and still makes – perfect TV. It blossomed on the demise of Group B rallying, hoovering up the now homeless cars and further developing them into short-range tactical nuclear missiles. The traditional story of manufacturer withdrawal led to a low-point in the mid-’90s, but now rallycross is back and bigger than ever, helped by its exposure with Global Rallycross in the States and revived popularity in the UK and Europe.

The Doran family name is intrinsically linked with the sport in the UK: Liam’s father Pat is a four-time British rallycross champion who came in during the heyday of the sport in the early ’90s and competed against the legends of the time. After initial success in the European championship, Pat partially retired in 1994 to successfully run his own business before being drawn back into the fold in 2001; his first title came at the wheel of his famous RS200 ‘Rosie’ in 2002, a second in a Fiesta ST Turbo in ’05 and then another pair in ’09-10, also in a Fiesta.

Competing isn’t all he does for the sport: the family’s commitment to rallycross goes much deeper, and in the late 2000s they first rented and then bought the Lydden Hill track in Kent – the spiritual home of rallycross. It’s gradually being transformed into a modern venue, and every meeting sees the crowds flock to its natural amphitheatre. Pat’s son Liam grew up around racetracks, so it was no surprise that he wanted to follow in his father’s footsteps.

Liam: “From the age of three I’d be trying to help him fix his car – or thinking I was being helpful at least. If anyone ever asks who my hero was, it was always my dad. I always wanted to be like him – he gave me the passion. All I ever wanted to do was be a racing driver. I used to try and drive the lawnmower… anything to drive something!”

“When I raced in the British Rally Championship for the first time in a Supercar it was in my dad’s car. He let me try it out, and then gave me the chance for one year to have a go. He was my direct team-mate, and I made the most of it, trained as hard as I could – and he beat me! I came second. But he was happy that I’d met his expectations. At some point I guarantee I’m going to come back and win the British championship like my dad did. It’s something I’ve got to do. He’s 52, so I’ve got 25 years or so. Though I’ve got to do it four times of course…”

The base car is a Citroën DS3 built by M-Technology in France – effectively the same as a WRC – and prepared by Hansen Motorsport in Sweden. But as soon as Liam’s 2012 car arrived at Doran HQ it was stripped back and prepared for a fundamental change in concept. One of a pair of Citroën DS3s run by the team during 2012, the two cars had a big difference. Pat’s British Rallycross Championship car ran its engine in the factory inline configuration, whereas Liam’s European Rallycross Championship car was switched to transverse. Pat explains the reasoning:

Pat: “If you see the start-line of a rallycross circuit and look down at the black tyre marks, you will see the cars go off at a slight twist. As they leave the line the back wheels try and come round. The reason for that is because the engines are normally inline and so powerful that the internal inertial motion of the engine pulls the car to one side. But with a transverse car, as the engine is facing the direction of travel it gives you more even lateral grip. It’s better off the start, but also through the corners. You’ll see that inline cars like the older C4 drift through corners, whereas these just grip and go. It’s not so dramatic, but it’s so much more effective.”

You’d think that changing the engine configuration should be relatively easy, but the problems are well-known and go back to the sheer grunt a Supercar-spec rallycross engine puts out.

Pat: “The WRC cars went transverse in the ’90s, but we’ve only now been able to consider changing over because it’s only recently that we’ve had a gearbox strong enough to take the amount of torque and power that a Supercar produces. The WRC was easy with only 300 – now around 250hp – whereas we have 600. So we’re using a new Sadev unit, who seem to be the only people who can make a gearbox reliable enough to handle the power. It’s a six speed ‘box, though we only tend to use five.”

“The power actually makes the car easier to drive. The comparison I use is with the boats: if you buy a little 30-footer it’s a nightmare to drive the thing on the water, because it gets knocked around. But you drive a 70-foot boat and it sits there like a tank and it’s easy to move about. It’s the same kind of thing here. If you have a small, low-powered car you’ve got work all the time: you have to be so precise on where you’re braking and accelerating.”

“WRC drivers always say that they can’t believe it when they drive a Supercar. They can make mistakes and get away with it. In a WRC, if you approach a corner and you’re coming in with the wrong gear and the wrong angle you haven’t got any power to get you out of it. With these, you can come in at the wrong direction, the wrong angle and the wrong speed, floor the girl and she’ll just power out of it. And that’s the buzz. That’s why they all get out and can’t believe it. That’s why Colin McRae always said that the quickest car he ever drove was a rallycross car – better than F1 or anything. He drove Dermot Carnegie’s 700hp Focus in 2002 and it blew him away. It’s the absolute raw grunt. They only do 130mph top – though that’s gearing rather than anything else – but they do 0-60mph in less than two seconds. Which is faster than if you threw it out of the back of a plane.”

Before you think that easier means that the car is simple to drive, think again: remember that a WRC car not only has half the power but also doesn’t have to deal with half a dozen other cars slamming into it in a corner. The power means that rallycross drivers can concentrate on the frenzied battle around them rather than worrying about a textbook correct angle of entry.

Along with the change in orientation and packaging, the Dorans also made a fundamentally change with the engine itself, moving away from the original Oreca-tuned unit and swapping to a Julian Godfrey Engineering engine. Torque is the objective: rallycross is all about getting out the corners and quick recovery from incidents, so if you’ve got a very torquey engine you can control the power on the throttle rather having to change through the gears. Godfrey is a veteran tuner, focussing on rallycross (he also provided Rhys Millen’s Hyundai Global Rallycross engine) but also covering hill climbing (the Doran’s Pikes Peak RS200 and several major European competitors) and touring cars.

Pat: “Sverre Isachsen won the ERC three times in a Ford Focus with an awesome power unit produced by Julian Godfrey. He’s always worked on my old Fords and I’ve known him for 20 years – he’s a lovely lad – and he produced this engine for Sverre where he only had to use four gears, whereas the Citroën had to use six. If you hear a WRC Ford engine it’s very deep, throaty engine and the Citroëns are more high, revvy engines. That’s why Sverre won the ERC, because he could come out of corners quicker than anyone else. So we wanted to put that principle to work in the DS3.”

“We decided to do the most unethical thing as far as Citroën were concerned: of going away from Oreca to try the Godfrey version. It’s still a two-litre, four-cylinder Citroen block – the same block and head as everyone else – but the Oreca engine works from between four and six thousand revs and the Godfrey engine works between around three and half and seven thousand, which gives you more range and much better power at the bottom end. With an Oreca engine you’d come up to a corner and have to change through the gears, but with this engine you can use a lot wider gearing. You can feel the grip with your backside.”

Another radical change with this DS3 has been a shift in which suspension methodology is used: there has been a back and forward between double-wishbone and McPherson struts over the years.

Pat: “It’s funny how it all goes around. My old RS200 is double-wishbone all round, but then everyone followed the WRC and moved to McPherson in the mid-’90s. Then everyone shifted back to double-wishbone in the modern era as that technology improved. But like with the gearbox, new developments have meant that McPhersons are coming back. Reiger are now able to do more with the McPhersons with adjustments and stability, and we used them on Liam’s DS3 during 2012. My DS3 stayed inline and double-wishbone, but on Liam’s we’ve tried transverse and McPherson.”

Rallycross regulations are relatively open and roughly follow the WRC, allowing plenty of different mechanical and platform approaches to be taken. But one thing that is seriously limited in both series is the power of electronics and any backdoor traction control: taming the car is all about your right foot – exactly the way it should be. Everything active has been banned, so cars aren’t allowed speed sensors on the wheels or anything that can tell the wheels about grip. Even sensors for the gearbox can’t run through the ECU (the DS3 uses the latest Pectel system): it’s not allowed to know what gear the car is in.

The next major regs cover minimum car weight and turbos. All Supercars put out roughly the same power: the size of the turbo isn’t limited, but all cars have to use a 45mm restrictor to produce around 600hp. The DS3 uses one of the largest turbos possible, mainly for getting that power at the all-important bottom end. This could normally mean a less responsive delivery, but a lot of work has been put into maintaining the low-end hit, mainly through the use of a quad throttle body system.

The turbo itself did cause issues on Liam’s DS3 during 2012 – not because of anything to do with performance but purely to do with positioning. Because of the tight engine bay packaging, the turbo had to be mounted in the right-rear of the compartment, down low, which took it out of any direct air flow.

The heat it threw off tended to melt through any plastic components in the vicinity… For 2013 the Dorans are changing the position: the rules allow them a wider tunnel than they currently need with the transverse mounting, so that should give them a bit of space to play with.

The engine and turbo are the same on both the inline (as seen here) and transverse DS3s and can be swapped between them as necessary: there are just different exhaust manifolds and pumps in use. It’s a compact unit, as all the current WRC engines are.

Pat: “If you take all the gubbins off the engine it’s just four pistons and a crank. My view is that the engine is only there to survive what the turbo gives it. It’s not like a normally aspirated engine where it’s producing all the power. For us the turbo is producing the power; the actual engine is sitting there going, ‘Oh my god, I can’t deal with this!’. The heads are trying to lift, the blocks are trying to split in half… That’s why when these engines are built we have to dry sump them and build a cradle to hold the blocks together. We drill the blocks through from top to bottom, and brace them from underneath.”

“But the engines are actually very reliable. We get about eight meetings out of an engine. We’ve had one or two with little problems, but for a first year with a new project they’ve been phenomenally reliable. It’s just this thing of it being transverse and dissipating the heat because of the turbo position. You can see all the heat shielding we have to use.”

Tying all this stuff together is a whole lot of high quality piping and hoses. Forge Motorsport supply the intercoolers and radiators and prepare all the piping, which naturally has to be incredibly efficient and robust.

The car is send to Forge for bespoke fitment, which takes a couple of weeks to complete.

The big intercoolers are right up in the nose, whereas the radiators are rear-mounted, which is the traditional route in rallycross.

This not only helps keep them out of immediate danger but makes for a better weight distribution – and there’s plenty of airflow to them via the side vents.

The rear also contains the oil and the header tank for water; normally the car doesn’t go through much fluid during a weekend – it it does, you’re in trouble… Fuel is series-standard VP Racing, road-legal 100-octane. The DS3 carries a mandated fog and brake light system on top of the standard units. For all the talk of brute force and simplicity, technology does still play a part: and F1 tech at that. The DS3 uses McLaren TAG alternators, which are more expensive but very reliable and able to take both the extreme temperatures and the pounding a Supercar gets every time it goes out.

Braking is handled by Alcon disks mounted all round, nestling behind Toyo tyres on magnesium Speedline rims developed specifically for the car.

The DS3 uses a carbon triple-plate Alcon clutch, the installation of which plays an important role at the start of a race. It all goes back to how the car gets off the line, which involves two things: mechanical grip and electronic controls. The clutch plays a fundamental part in the former, as the team run theirs with a bit of play when cold. The principle is that when the car pulls off the line the clutch slips very slightly, helping control all the power being delivered and giving the driver five metres or so where the car starts moving without lighting up the tyres before heat expansion clamps the clutch into working position. It’s very simple but fantastically effective – and legal.

As launch control systems are banned, instead a custom RPM and boost setting is dialled in, controlled by a button on the steering wheel. Settings are preset by the car’s engineers and then fine-tuned on the dummy grid from the cockpit: that could be anywhere from five to seven and half thousand revs and one to two boost depending on conditions.

The clutch pedal is only used for the start: the procedure is foot down and thumb on the launch control – and wait for the lights. Lights off, foot up and then thumb off the button after a brief pause. From then on its sequential all the way and left-foot braking to balance the car.

Pat: “If there’s no grip at all because you’ve got it completely wrong, which can happen from time to time, you then lift your foot off the throttle and go back down again, so there is that balancing act. But if you get all the calculations right then you’re off and clicking into second gear. Sometimes I leave mine on for a second if I feel it hasn’t got enough grip. It’s a bit like the stories of Schumacher, where he ran some corners in races using the launch button to help with traction.”

The cockpit of the DS3 is pretty spartan – there’s as little distraction as possible. After surviving a start (which in itself is no guaranteed thing) the driver then has to completely focus on what’s ahead. And behind. And to the side. Rallycross tracks don’t have the luxury of a straight to relax on: total concentration is required to keep the car pointing in the right direction as it bounces and bucks across the different surfaces. No mechanical changes can be made from the cockpit, so the switchgear is kept basic: wipers, fans, ignition, launch – and then a main master switch for everything else.

Aside from the magic red button, the wheel is a standard OMP removable piece; the handbrake and sequential shifter are mounted up high for easy access. There are shift lights on the dash, but drivers don’t tend to use them: this isn’t a sport where getting the right revs and perfect angle into a corner are a priority.

Pat: “Obviously there’s an optimal point to change, but rallycross is more about reactions, about trying to keep the car straight. You go from tarmac to no grip on the loose and the car is trying to go backwards everywhere. When we test at Lydden and don’t use the loose sections and we always learn more, as the car actually talks to you and you’re not holding onto this animal. If I go and do a trackday or circuit race it’s like having a cup of tea!”

As with any professional outfit, it take more than just the man behind the wheel to go racing. A data engineer oversees all the electronic systems, whilst a second engineer sees to GPS and cameras – they use four GoPro cameras as standard, not for public consumption but to help with driving analysis. The footage, which includes various driver-facing, internal and external angles, is used to corollate the data streams and help fine-tune set-ups over a race weekend. The less hard a driver is having to work, the better set up the car…

2012 was no disaster, but it also didn’t prove to be the success for the DS3 that the Dorans had hoped for – at least according to their high threshold of what would qualify as success. But they could hardly be disappointed with second both in the European Rallycross Championship for Liam and in the UK for Pat (ironically behind Julian Godfrey in a Fiesta!).

Pat: “It didn’t quite work this year, but that was mainly down to us being a new team, operating in two championships with a new car and trying a new engine at the same time. Maybe we were a bit ambitious, though Liam came second in the ERC. He won the last round in Germany and the car was getting there, but we knew it wasn’t completely right. That was mainly because of the gearing: specifically the ratios. We’re slowly getting there and fine-tuning it all. It was the suspension as well: Reiger only came in to properly help us towards the end of the year, and they’ve been absolutely superb. Since they’ve come on board it’s been a godsend. And we know the concept is right. For this year we’ll have Godfrey engines in all our Citroens – we should have four: two in the BRC and two in the ERC, likely three DS3s and the C4.”

The Doran’s base is now a hive of activity, with preparations well underway for the new season ahead that will include more outings for the hillclimb-spec RS200. The DS3s will be aimed squarely at winning the championships in 2013 – and your sights should be set on seeing them try to achieve that.
MONSTER ENERGY CITROEN DS3 RALLYCROSS SUPERCAR
TECHNICAL SPECIFICATIONS

CHASSIS
Structure: M-Technologies built and prepared, lightened and reinforced body with welded, multi-point rollcage
Bodywork: Carbon-composite fibre, P4P perspex windows

ENGINE
Julian Godfrey Engineering 2.0 turbocharged engine
Bore x stroke: 85.5 x 88 mm
Capacity: 2,020 cc
Maximum power: 590 bhp at 5,500 rpm
Maximum torque: 900 Nm at 3,850 rpm
Specific output: 277 bhp/litre
Distribution: Double overhead camshaft valve train driven by timing belt, four valves per cylinder
Engine Management: Pectel SQ6 unit
Additional suppliers: NGK spark plugs, Pipercross air filter, VP race fuel, Forge Motorsport air and water coolers

CLUTCH
Alcon Carbon triple-plate

TRANSMISSION
Type: Four-wheel drive
Gearbox: Sadev transverse six-speed sequential/manual control
Differential: Sadev front and rear mechanical, auto-locking
Sadev shafts/CDX joints

BRAKES
Front: 330mm ventilated disks, Alcon 4-piston callipers
Rear: 330mm ventilated disks, Alcon 4-piston callipers
Distribution: Adjustable from cockpit
Handbrake: Hydraulic control

SUSPENSION
Type: McPherson
Shock absorbers: Reiger Racing thee-way adjustable shock absorbers (low- and high-speed compression and rebound)

STEERING
Type: Hydraulic power-assisted steering

WHEELS
DRY: 8×17″ Speedline wheels
WET: 8×18″ Speedline wheels
Toyo Tyres

DIMENSIONS, WEIGHT AND CAPACITIES
Length/Width: 3,948mmx1,820mm
Wheelbase: 2,461mm
Track: 1,618mm (front and rear)
Fuel tank: 30 litres
Weight: 1,100kg/regulation 1,300kg minimum including driver

Jonathan Moore frpm SPEEDHUNTERS