ACE CAFE RADIO

    jeudi 27 juin 2013

    PIKES PEAK : ROMAIN DUMAS CONFIRMS HIS DARK HORSE STATUS IN QUALIFYING !



    With only one practice session remaining, this Friday, before the 91st edition of the legendary Pikes Peak hill climb event, Romain Dumas showed well during the various sessions, including qualifying. Driving the Norma M20FC PP, the French driver signed the second fastest time behind Sébastien Loeb, the multiple World Rally champion piloting a factory-backed Peugeot 208 T16.

    Winner in the GTE Pro class at the 24 Hours of Le Mans with Porsche on Sunday, Romain Dumas immediately caught a flight to Colorado where the Pikes Peak International Hill Climb technical and administrative verifications were awaiting him on Monday. After a first day of testing on Tuesday, the serious affairs began in earnest on Wednesday with qualifying held on the first of three sectors that together make up the event. Romain Dumas took the second spot just behind Sébastien Loeb, and reiterated the performance on Thursday during practice on the second portion of the course, with another second place time in the Unlimited class.

    « After getting warmed up on Tuesday with only one run on the first sector, we turned up the heat for the qualifying session »explains Romain Dumas. « With a lot of downforce, the Norma M20FC PP handles well in this portion of the course with many fast corners. We can still progress in terms of the setup, but we're in the position of underdog behind Sébastien Loeb as we thought. Our first objective is therefore complete. I know there is still time to gain. On Wednesday, with four runs, the practice session was positive with constant improvement. In this section as well, we have some room to gain several seconds, especially in the hairpins. »

    Second in the 2012 edition, Romain Dumas feels ready for combat even if he knows the fight will be difficult. « We're battling with the weapons that we have » he admits. « After these sessions, I'm certain that our choice corresponds well to Pikes Peak's characteristics. However, we're up against a major manufacturer, who has already won here in the past, and a nine-time World Rally champion for a driver. It's up to us to put pressure on them and play every card we have. We still have one day to refine the settings. Currently, it's satisfying to know that we are ahead of other officially entered brands such as Hyundai or Mitsubishi, and drivers such as Jean-Philippe Dayraut and Monster Tajima, who have more experience in this event. I'd like to thank the whole team who are working very hard. People can't imagine how devoted they are. »

    The final practice session will be held on Friday, followed by the Fan Fest in downtown Colorado Springs. The race will be held on Sunday, June 30.

    Source : Romain Dumas
    via Endurance-Info

    ERC: after Corsica, Belgium’s low country / Après la Corse, le « plat pays »


    Almost six weeks after Bryan Bouffier’s triumph in mountainous Corsica, the FIA European Rally Championship moves on to Belgium’s polder country for the Geko Ypres Rally. Freddy Loix is targeting an eighth victory.
    Quarante jours après le triomphe de Bryan Bouffier dans les montagnes corses, le Championnat d’Europe des Rallyes FIA reprend en Belgique, le « plat pays », avec le Geko Ypres Rally que Freddy Loix tentera de remporter pour la 8e fois.
    Although the sixth round of the 12-round 2013 ERC is one of Europe's oldest fixtures, it is poised to provide a glimpse of the future this weekend.
    Indeed, Ford and Peugeot have chosen Ypres to reveal their latest creations (the Ford Fiesta R5 and the Peugeot 208 T16) which will soon defend the two brands’ colours in the sport. Meanwhile, Michelin will be unveiling its new Pilot Sport R customer competition tyre range.
    True to tradition, the Belgian rally has attracted a strong entry, led by local star Freddy Loix. Loix is standing in for Jan Kopecky in the works Skoda Fabia S2000/Michelin and will be hoping to take his personal score to eight Ypres wins. The 2011 PWRC champion Hayden Paddon is also back, in a Symtech Racing-run Ford Fiesta S2000. Finland’s Mikko Pajunen is driving a similar car, while Craig Breen, Bryan Bouffier and Jean-Matthieu Léandri will compete in Peugeot 207 S2000s. François Delecour has withdrawn, however. Poland’s Michal Solowow is the only driver to have entered a Regional Rally Car (Fiesta RRC).
    The event’s fast, narrow, dusty stages, long straights and right-angled bends are a hallmark of the region, but three tests have been modified this time round, namely Heuvelland (14.99km), Mesen (9.66km) and Wijtschate (24.89km). The programme features 20 stages totalling 297.93km, plus a 4.88km Qualifying Stage (8pm, Thursday), which is a first for an asphalt rally.

    Ce week-end, outre la sixième des douze manches européennes, c’est l’avenir du rallye qui sera présenté sur l’une des plus anciennes épreuves de sport automobile européennes.
    Ford et Peugeot ont choisi le Rallye d’Ypres pour dévoiler au public leurs dernières créations - la Ford Fiesta R5 et la Peugeot 208 T16 - qui portent le futur de ces deux marques dans la discipline. De son côté, Michelin présente sa nouvelle gamme de pneus « compétition-client » Pilot Sport R.
    Comme chaque année, le plateau est copieux au Rallye d’Ypres. Le Belge Freddy Loix remplace Jan Kopecky au volant de la Skoda Fabia S2000/Michelin officielle avec laquelle il va tenter d’améliorer son propre record de victoires (7) sur cette épreuve. Le Champion du monde PWRC 2011, Hayden Paddon, est de retour au haut niveau sur une Ford Fiesta S2000 du team Symtech Racing. Même monture pour l’espoir finlandais Mikko Pajunen. Craig Breen, Bryan Bouffier et Jean-Matthieu Léandri représenteront le clan des Peugeot 207 S2000 (François Delecour est annoncé forfait), alors que le Polonais Michal Solowow est le seul concurrent engagé sur une Regional Rally Car (Fiesta RRC).
    Avec ses spéciales rapides, étroites, poussiéreuses, ses longues lignes droites ponctuées de virages à angle droit, le parcours du Rallye d’Ypres est très particulier. Cette année, trois spéciales ont été modifiées : Heuvelland (14,99 km), Mesen (9,66 km), Wijtschate (24,89 km). Le parcours compte 20 spéciales pour un total de 297,93 km chronométrés. Une Qualifying Stage (4,88 km) est organisée pour la première fois sur asphalte. Elle se tiendra jeudi soir à 20h00.

    2013 Assen: Valentino Rossi feels the extra pressure, Cal Crutchlow doesn't


    Rossi -Crutchlow Assen 2013 day 1from TWOWHEELSBLOG
    Jorge Lorenzo was just seven points behind Dani Pedrosa in the standings before his crash this afternoon ruled him out of the Assen GP.
    Valentino Rossi who finished the dry session in fourth and the second one in the wet second admitted after wishing Lorenzo a speedy recovery, that he now feels more pressure and motivation to try to stop Repsol Honda duo Dani Pedrosa and Marc Marquez, in order for them not to take too many points off of his team mate and see if he can finally return to the podium.
    “It’s a great pity for Yamaha, for the Team and for him [Lorenzo] as he is fighting for the Championship. I hope that he comes back as soon as possible, hopefully for the next race in Sachsenring. I hope to do a good result because I am now the man of the team for Yamaha, for the Factory team and all the guys. Now there is some extra motivation and some extra pressure because unfortunately Jorge had a big crash and is injured and cannot race, so I will be the only factory Yamaha. I will have to try and make a good result in front of the Hondas for the championship,” said Rossi.
    Rossi -Crutchlow Assen 2013 day 1Rossi -Crutchlow Assen 2013 day 1Rossi -Crutchlow Assen 2013 day 1Rossi -Crutchlow Assen 2013 day 1Rossi -Crutchlow Assen 2013 day 1Rossi -Crutchlow Assen 2013 day 1Rossi -Crutchlow Assen 2013 day 1Rossi -Crutchlow Assen 2013 day 1

    Talking about his first day at a dry and wet Assen Rossi added, “It’s been a positive day for us because in the dry it was not so bad this morning, we continued to work with our new setting and the first impression was positive, although we still have to work to improve. We had something important to try this afternoon in the dry but unfortunately it was wet. Anyway we continued our work in the wet and it was a good practice, we did a good job with our new setting and the bike was also very good in the wet. I improved lap by lap; I had good pace and I was in second position. We have to continue to work in both conditions, everybody knows here in Assen it can be wet or dry.
    Yamaha Tech3 rider Cal Crutchlow, who is still in the middle of negotiating with a number of teams next season for a factory bike, also wished reigning MotoGP champion Jorge Lorenzo a quick recovery, but he said that Lorenzo’s crash won’t put him under any extra pressure, because his job is to beat the other riders, including the Yamaha factory riders.
    “I will be doing my own job which is to ride for our team and my job is to finish as high up as I can. My job is to also beat the factory Yamahas so if I have a chance, I am going to try and beat Jorge anyway. It changes my position not one bit, makes no difference at all,” said Crutchlow. “It’s unfortunate it has happened to Jorge as he was going to be the man to beat again, for sure. I’m pleased in a way it’s only a broken collarbone because it could have been a lot worse, especially how fast that part of the track is.”
    The British rider was second fastest in the morning time session, but dropped down to seventh in the wet, because he opted to sit out the final minutes when a number of riders upped their paces demoting him.
    “I am really happy with today. I was second in the dry this morning although I need to improve my pace in the first sector because the gap to Lorenzo in that section was pretty big. The gap of everybody else was pretty big to be fair and Jorge was doing an amazing job. It’s a huge shame that he got injured in FP2 and I wish him a speedy recovery because the Championship is not the same with him not in it. In the rain this afternoon I was very comfortable and I am one of the fastest on track. Before the end of the session I didn’t want to take any risks so I came into the pits and lost a few places. Had I stayed out I am sure I could have been in the top three again but I am happy enough with my performance in both conditions,” continued Crutchlow.

    Jorge Lorenzo out of Assen GP with fractured collarbone


    Jorge Lorenzo crash 2013 Assen FP2from TWOWHEELSBLOG
    Jorge Lorenzo’s run for the championship title was dealt a cruel blow this afternoon when the Yamaha rider was pitched off of his M1 during a wet second free practice at the Dutch circuit at Assen, suffering a left collarbone fracture and a slight concussion.
    Lorenzo had arrived at Assen brimming with confidence after two consecutive victories, and his words during the pre-event press conference admitting he was feeling very strong and at the top of his form, now sounds - if one is superstitious - omninous, as if he was tempting fate.
    The reigning world champion was on his 9th lap of the session when he entered turn 13 - the Hoge Heide - and touched the painted lines and got caught out by standing water, crashing at 238 km/h.
    Jorge Lorenzo crash 2013 Assen FP2Jorge Lorenzo crash 2013 Assen FP2Jorge Lorenzo crash 2013 Assen FP2Jorge Lorenzo crash 2013 Assen FP2

    A suffering Lorenzo was transported the Clinica Mobile where he was immediately diagnosed with a fracture to his left collarbone and sent the Assen hospital for further tests and then will return to Barcelona where he will undergo surgery under the capable hands of Dr. Xavier Mir either Saturday night or Sunday morning.
    Dr. Mir said, “Jorge has a high inertia trauma but results are normal from initial neurological examination. We will move to Assen to make head and chest scans and also an abdominal exploration. Our first diagnosis revealed that there is a left clavicle fracture with a slight shift that will need surgery to repair the bone. This injury is in the background while we rule out any other major injury that may become apparent within 24 hours. These kind of impacts at more than 200 km/h need some time for the body to recover to be able to discard any other major injuries. In principle tomorrow he can travel and within 48 hours he will be operable.”
    At the present Lorenzo’s recovery period is uknown, but Dr.Costa who is at Imola to follow World Superbikes believes it could take a month before the Spaniard is at full fitness, but with two back-to-back races, at Sachsenring (July 14th) and Laguna Seca (July 21st) and both with mainly left hand corners, Lorenzo who many are expecting to return for the German round will have to call on all his mental strength to make up for the physical weakness that he will be suffering.
    Just reminder, a heroic Colin Edwards broke his collarbone and damaged his muscles around his ribs during the 2011 Catalunya GP on a Friday. Dr. Mir operated the American rider inserting a plate and some screws, and just nine day Edwards took a third place podium at a wet Silverstone.

    Marc Marquez fastest in wet FP2 at Assen as Lorenzo fractures collarbone

















    from TWOWHEELSBLOG
    The weather forecasts for Assen were more than right, as buckets of rain were falling during this afternoon’s MotoGP’s second free practice.
    The wet session was important to find a set-up for a race that is expected to be wet, and also for the riders to see if their helmet visors were working better than during the Le Mans round. Many may remember that in the French round a number of riders suffered huge issues with fogging.
    Marc Marquez took a number of risks - like using a hard rear wet tire - to end up on the top of the timesheets with a best lap of 1:47.617 with his last flying lap demoting Valentino Rossi to second and +0.252 adrift.
    Team mate Jorge Lorenzo suffered a huge highside twenty minutes in to the session - he had a hard rear on his M1 - when he touched the slippery wet kerb at the Hoge Heide.
    The Yamaha rider initially seemed okay as he walked away from the crash with just one of his boots partially unlatched, but he slowed down holding his wrist and forearm, but it was immediately suspected that he was suffering from a collarbone fracture, which has now been officially confirmed, and this could mean an end to his title hopes, as it is a compound fracture.
    Lorenzo is now expected to fly to Barcelona and undergo surgery at the Dexeus Clinic, and tentative news have him returning for the Sachsenring round.
    Third fastest Dani Pedrosa, but the Repsol Honda rider was more than six tenths from his rookie team mate who showed an impressive ability to adapt in wet conditions.
    Stefan Bradl was fourth and is now using Brembo brakes and he was followed by the Ducati factory riders, Andrea Dovizioso and Nicky Hayden who posted the exact same times. Yamaha Tech3’s Cal Crutchlow was seventh and 1.444 second off pace, but apparently the British rider wasn’t taking any unnecessary risks in the very tricky conditions.
    Three CRT riders closed out the top ten and they were Danilo Petrucci, Yonny Hernandez and Michael Laverty.
    Aleix Espargaro also binned his ART machine and he was seen holding his left wrist, while Karel Abraham also crashed as his CRT machine continued by itself smashing into the tire barrier.
    2013 MotoGP Assen FP2 results:
    01- Marc Marquez – Repsol Honda Team – Honda RC213V – 1’47.617
    02- Valentino Rossi – Yamaha Factory Racing – Yamaha YZR M1 – + 0.252
    03- Dani Pedrosa – Repsol Honda Team – Honda RC213V – + 0.623
    04- Stefan Bradl – LCR Honda MotoGP – Honda RC213V – + 0.977
    05- Andrea Dovizioso – Ducati Team – Ducati Desmosedici GP13 – + 1.065
    06- Nicky Hayden – Ducati Team – Ducati Desmosedici GP13 – + 1.065
    07- Cal Crutchlow – Monster Yamaha Tech 3 – Yamaha YZR M1 – + 1.144
    08- Danilo Petrucci – CAME Iodaracing Project – Ioda Suter BMW – + 1.414
    09- Yonny Hernandez – Paul Bird Motorsport – ART GP13 – + 1.512
    10- Michael Laverty – Paul Bird Motorsport – PBM 01 – + 1.821

    Brandon’s ’75 CB350 “Doris”


    doris-002
    Brandon is a computer graphics supervisor for feature films. – although we prefer they way he described it in his own words: “I spend most of my time behind a computer assembling things that never manifest themselves in the real world.” All my Hollywood illusions, shattered!
    Luckily for us he has other passions, and this CB350 is the manifestation of his newly discovered creative obsession. A journey that started a lot like this…
    newfriends.0001
    When I’m not at work I’m usually in my workshop trying to scratch the itch of needing to build real things. I started working on motorcycles about two years ago. I had never ridden before, but I went to meet my girlfriend’s family for a weekend in the California desert.
    doris-024
    In the desert I met a group of dirt bike riding engineers and lawyers who put me on two wheels about five minutes after I’d set foot in the sand. I had a great time and decided then that motorcycles would have a place in my life. I had never ridden before or owned a bike, so I didn’t really know anything about them. So I decided to build one to make up that knowledge gap and have a strong goal-oriented project.
    doris-009
    I get a lot of inspiration from motorcycles blogs online and keep a running collection of my favorite bikes. I knew going into this project that I wanted something in between a cafe racer and a brat style bike but I was willing to let it evolve as the project went and not start with a drawing or strong concept image.
    doris-004
    I really just wanted it to have the minimalist elements of a cafe racer, but be strong enough and flexible enough to hit a trail or two if the opportunity presented itself.
    doris-014
    I did all the work on this bike myself in my workshop. It’s a frame-off restoration. I had no idea how much cleaning and painting would be involved in restoring a vintage bike when I started. I felt like I spent half my time sandblasting, scrubbing, painting, or polishing. (…Welcome to the glamorous world of the custom builder, Brandon)
    doris-006
    The part of the bike that took the longest to build was the swingarm for the monoshock suspension, mainly because I needed to get it right. I kept telling myself “I’m the one who’s going to be sitting inches over that back tire, riding fast, so this need to be safe”.
    doris-017
    I let the bike evolve as I built it and plenty didn’t go right. I had several failed attempts at adding fenders that never made it on the bike. Valve springs got put on upside down initially, until I learned there was a right way. I never knew until the front tire was mounted, and had air in it, that it would actually fit between the front forks.
    doris-011
    Adding the voltmeter to the dash is a product of me killing a 4-cell battery early on. Now I can keep an eye on my voltage level with the new one.
    doris-015
    I intend to ride the bike to work (about 15miles) each day.  I’m planning on my longest ride yet this weekend as I’d like to ride out to Born Free 5 on the June 29th.
    doris-019
    I do think I’m going to re-visit the seat design. It’s very thin and could use thicker padding. I’d like to make it 2-3 times as thick and extend it forward a bit and channel-out the bottom of the seat so it can cover up the top of the shock. I love how it looks now, but making it more comfortable to ride will ultimately make it a better bike. I also need a new top triple clamp (slightly cracked) which I’m having trouble finding a replacement for.
    doris-018
    Overall I’m extremely happy with how the project turned out. For a while I never saw an end to it, then everything came together. I think with a few small tweaks (like the seat) I could have a fun little commuter that can jump on a fire trail to take a short cut home.
    doris-022
    I don’t think I can stop building bikes. My next project I’d like to do something with the Honda NX650 Dominator, or XL600 platform. I think 4-stroke singles are neat.
    Well Brandon, it’s great to see that your computer skills are reflected in your skills in real-world building – although the outcome does look a bit like a 3D CGI virtual prop from a steampunk sci-fi movie. Luckily that’s a look people round here like. A lot. …We’d love to see whatever you do next.
    via The Bike Shed

    Iron & Resin: Lost & Found In Baja

    Iron & Resin: Lost & Found In Baja from Iron & Resin on Vimeo.

    The Race to the Clouds / « La course vers les nuages »


    The 91st Pikes Peak International Hill Climb will commence at 8am local time, Sunday, June 30 (4pm CET). Sébastien Loeb (Peugeot 208 T16/Michelin), Jean-Philippe Dayrault (Mini Countryman), Romain Dumas (Norma prototype) and Simon Pagenaud (Honda) will be there to challenge the established specialists.
    Dimanche 30 juin 2013 à 8h00 (heure locale), la 91e édition de la course-de-côte de Pikes Peak va s’élancer. Sébastien Loeb (Peugeot 208 T16/Michelin), Jean-Philippe Dayrault (Mini Countryman), Romain Dumas (proto Norma) et Simon Pagenaud (Honda) sont venus défier les spécialistes de « la course vers les nuages ».
    Pikes Peak is the second oldest American motorsport event after the Indy 500 (1911). It was first organised in 1916 following the opening of the track that twisted to the summit of Pikes Peak, near Colorado Springs.
    The event’s 19.98km course features 156 turns (with colourful names like ‘Engineers Corner’, ‘Ski Area’, ‘Glen Cove’ and ‘Devil’s Playground’) en route to the finish at an altitude of 4,300 metres. The average gradient is 7%, and the steepest part is 10.5%, with a total climb of 1,439m.
    Improvements made to the road and vehicle technologies have seen the record come down regularly. In the 1980s, Audi and Peugeot sent their works stars to tackle Pikes Peak in cars like the Quattro, the 205 and the powerful 405. In 1987, Audi was the first to squeeze beneath the 11-minute mark (Walter Röhrl: 10m47.s85s), while Peugeot responded the following year when Ari Vatanen posted a time of 10m47.22s in a Peugeot 405 T16/Michelin.
    After that, the first part of the course was asphalted and, in 1994, Rod Millen produced a 10min4.06s in a Toyota Celica Turbo. His record held for 13 years but was beaten by Japan’s Nobuhiro Tajima (Suzuki) in 2007 (10m1.40s). Tajima improved again in 2011 with an effort of 9m51.278s in a 910hp Suzuki SX4.
    Last year, the course was entirely asphalted and the winner Rhys Millen posted a new benchmark (9m46.164s) in a Hyundai Genesis. That time promises to be beaten this weekend if the weather conditions allow.
    The 68 ‘four-wheel’ competitors are divided into a number of classes: ‘Unlimited’, ‘Electric’, ‘Open Wheel’, ‘Pikes Peak Open’, ‘Pikes Peak Vintage’, ‘Exhibition’ and ‘Time Attack’. Peugeot is back with an official entry, spearheaded by the nine-time world rally champion Sébastien Loeb in an ‘Unlimited’ 208 T16 PP/Michelin (875hp/875kg).
    The French has dominated the different practice sessions held so far, but not everyone took part. His main threats are likely to be fellow Frenchmen Jean-Philippe Dayrault (Mini Countryman, 900hp/950 kg) and Romain Dumas (Norma prototype, 400hp/540kg).
    Last year’s winner, New Zealander Rhys Millen will drive a 900hp Hyundai Genesis PM850 T, while his father Rod has entered an electric 540hp Toyota TMG EV P002 prototype. Japan’s Nobuhiro Tajima (E-RUNNER) and Hiroshi Masuoka (Mitsubishi MIEV) are also listed in the ‘Electric’ class..
    The event, which places emphasis on outright performance, will also see an interesting battle between tyre leading firms such as Michelin, Yokohama, Avon, Hankook and Falken.
    Practice will continue until Friday evening.

    Après les 500 Miles d’Indianapolis (1911), la course-de-côte de Pikes Peak est la deuxième plus ancienne course automobile des Etats-Unis, organisée en 1916 après l’ouverture de la piste qui serpente jusqu’au sommet de la montagne Pikes Peak, au-dessus de Colorado Springs.
    Longue de 19,98 km, la course-de-côte de Pikes Peak compte 156 virages – dont certains au nom évocateur, Engineers Corner, Ski Area, Glen Cove ou Devil’s Playground… – jusqu’au drapeau à damier agité par le « Flag Man » à 4300 mètres d’altitude. La pente moyenne est de 7%, avec un passage à 10,5% (dénivelé positif de 1439 m).
    Les records ont régulièrement été battus avec l’amélioration de l’état de la piste et les progrès technologiques des véhicules. Dans les années 1980, Audi et Peugeot avaient envoyé leurs pilotes « usine » s’affronter à Pikes Peak au volant de Quattro, 205, 405 gavées de chevaux. En 1987, Audi fut le premier à passer sous la barre des 11 minutes (10min47s85, Walter Röhrl). Peugeot a répliqué l’année suivante avec Ari Vatanen qui améliora le record de 63/100e de seconde (10min47s22) sur une Peugeot 405 T16/Michelin.
    Puis la première partie fut asphaltée et en 1994, Rod Millen a réalisé 10min04s06 sur une Toyota Celica Turbo. Ce record a tenu 13 ans avant d’être battu par le Japonais Nobuhiro Tajima au volant d’une Suzuki en 2007 (10min01s40). Ce même Tajima a amélioré son propre record en 2011 et passé sous la barre des 10 minutes en réalisant 9min51s278 au volant d’une Suzuki SX4 de 910 chevaux.
    Depuis l’an passé, la piste est totalement asphaltée et le vainqueur de l’édition 2012, Rhys Millen, est donc détenteur du nouveau record sur une Hyundai Genesis en 9min46s164. Ce chrono devrait voler en éclat cette année si les conditions météo le permettent.
    Les 68 concurrents « 4-roues » sont répartis en plusieurs catégories :Unlimited, Electric, Open Wheel, Pikes Peak Open, Pikes Peak Vintage, Exhibition, Time Attack. Peugeot est de retour de manière officielle à Pikes Peak avec le nonuple Champion du monde des Rallyes, Sébastien Loeb, au volant d’une 208 T16 PP/Michelin de 875 chevaux pour 875 kg engagée en catégorieUnlimited.
    Le Français a largement dominé les essais préliminaires de juin, mais tous les concurrents n’y ont pas participé. Il aura pour adversaires ses compatriotes Jean-Philippe Dayrault sur une Mini Countryman de 900 chevaux/950 kg, et Romain Dumas sur un proto Norma de 400 chevaux pour 540 kg.
    Vainqueur en titre, le Néo-Zélandais Rhys Millen sera au départ sur une Hyundai Genesis PM850 T de 900 chevaux, de même que son père Rod, sur un proto Toyota TMG EV P002 électrique de 540 chevaux. Les Japonais Nobuhiro Tajima (E-RUNNER) et Hiroshi Masuoka (Mitsubishi MIEV) sont également engagés en catégorieElectric.
    Pikes Peak verra aussi s’affronter différentes marques de pneumatiques (Michelin, Yokohama, Avon, Hankook, Falken…) dans un exercice de performance absolue.
    Les essais vont se poursuivre jusqu’à vendredi soir. Le départ de la 91e édition sera donné dimanche 30 juin à 8h00 (16h00 heure française).

    DIJON : DERNIÈRE CONFRONTATION AVANT LES VACANCES !



    Une course sur le circuit de Dijon-Prenois a toujours une saveur un peu spéciale. Ils sont nombreux à aimer rouler ici, sur ce magnifique tracé qui fait, en plus, échos aux plus belles heures du sport automobile (et motocycliste) en France. Voilà pourquoi, depuis de nombreuses années, Eric Van de Vyver et son équipe d'organisation, mettent Dijon au calendrier des séries V de V. C'est donc avec grand plaisir que nous rejoignons la Bourgogne, et que les paddocks vont s'animer dès le 27 juin prochain pour la préparation de ce quatrième week-end des V de V Endurance Series 2013.

    Tout comme lors du dernier meeting, disputé sur le circuit Paul Ricard, toutes les catégories sprint et endurance vont se retrouver à Dijon afin de s'affronter à nouveau avant que la période estivale ne vienne entrecouper cette saison 2013. Qu'on se le dise, le championnat est bien lancé ! Lors du dernier rendez-vous, la bataille a été féroce dans chacune des catégories, et au final, on a pu constater quelques changements de leaders dans les classements. Attention, car la place de numéro 1 est fragile ! Il suffit d'observer les écarts de points pour s'apercevoir qu'il est impossible de désigner un unique leader à ce stade du championnat. Chez les GT, les Porsche d'IMSA Performance Matmut et de Crubilé Sport sont côte à côte, alors que la Ferrari Visiom n'est distancée que d'une poignée de points. GTV 2 ou GTV 3, c'est quasiment la même analyse, toujours avec le plaisir de voir s'affronter en piste des voitures de marques différentes, et des pilotes de diverses origines, gentlemen drivers ou professionnels. Dans le championnat sport prototype, c'est tout aussi serré et intéressant à suivre. Les équipes de pointe ne sont pas à l'abri de quelques soucis, et certaines absences à l'arrivée peuvent coûter cher au classement général. CD Sport, TFT, Palmyr, les Norma trustent les premières places dans le tableau, mais c'est aussi parfois en l'absence de certaines voitures lors des dernières courses. Attention donc au retour des Wolf et Tatuus sur les prochaines manches, sans oublier les Ligier de Philippe Alliot qui ne sont pas là pour faire de la figuration. Chez les VHC, on parle toujours d'endurance avec des courses de deux heures, même si l'équation est un peu différente avec ces bonnes vieilles mécaniques dont il faut savoir prendre soin. C'est en tous les cas un plateau de voitures d'exception qui évolue sous les yeux des spectateurs et entre les mains de pilotes passionnés.

    Reste les deux challenges sprint de ces V de V Endurance Series, qui montent eux aussi en puissance avec toujours plus d'engagés au départ, et des pilotes qui ne réussissent pas véritablement à se départager. On y retrouve quelques leaders habituels, et qui ont déjà brillé les saisons passées, mais d'autres noms se font aussi remarquer, parfois même avec des voitures moins performantes sur le papier ; c'est notamment ce que l'on a pu observer dans le Challenge Monoplace. A Dijon, les deux catégories confondues, on va assister à un total de 7 courses (3 en monoplaces et 4 en Funyo), ce qui va donner le rythme de ce week-end de la fin juin, entre les différentes manches d'endurance.

    Le circuit de Dijon-Prenois offre un tracé rapide et rythmé, qui oblige à une attention de chaque instant pour ne pas perdre de précieux dixièmes en qualifications. En course, c'est aussi aux pneus qu'il faudra faire attention, en réussissant à les préserver tout au long des relais sur cette piste au bitume abrasif. Puisque l'on aborde les pneumatiques, les Funyo vont pouvoir ici chausser les Michelin S410 pour la première fois, des gommes développées en premier lieu pour les voitures du championnat Endurance Proto, et qui ont été adaptées aux Funyo pour continuer un développement d'ensemble au sein des V de V Endurance Series. Les pilotes auront d'ailleurs longuement l'occasion de les tester avec les trois séances d'essais du vendredi et ces 4 manches réparties entre le samedi et le dimanche.

    Dans les coulisses, on devrait aussi passer de bons moments, parce que l'ambiance est toujours conviviale au sein des V de V Endurance Series, mais aussi parce que le programme des organisateurs est bien rempli. Comme toujours à Dijon, c'est aussi le soleil et la fête avant les vacances, et l'équipe de Monster Energy sera présente pour mettre l'ambiance durant le week-end, sans oublier de distribuer des boissons aux visiteurs et au public. Pour les pilotes et les teams, le vendredi sera l'occasion de se retrouver lors de la soirée privée organisée par V de V Sports et le groupe Ricard.

    Dans le village du paddock, différents exposants seront présents, dont la marque de vêtements Costume Carbone qui présentera l'ensemble de ses collections 2013. Des animations auront également lieu sur l'ensemble du week-end, et un parking d'exposition réunira les plus belles supercars du moment, histoire d'offrir aux spectateurs des éléments de comparaison entre les bolides qui évoluent sur la piste et certaines de leurs versions « civiles ».

    Rendez-vous donc les vendredi 28, samedi 29 et dimanche 30 juin sur le circuit de Dijon-Prenois !

    Source : VdeV Endurance Series
    via Endurance-Info

    INTRODUCING “LASUPRA” EVO, AKA EPIC LANCIA


    It all started the way so many conversations do in the modern age: a faint buzz in my pocket which quickly transformed into a line of text in the palm of my hand. On the other end of the push notification transmission was the Speedhunters HQ in Stockholm, where the team was hard at work arranging feature cars to be shot during our European tour. The latest message was unmistakable and read “Epic Lancia Delta Evo is coming to Gröndal!”
    Before I even clicked on the link my interest had already piqued. It’s rare these days that I get very excited from an email, but this is a little different. What happened next has also become a regular part of daily life. I entered the online Speedhunters work area where a discussion was already being formed detailing a list of vehicles that Paddy, Dino and myself would be divvying up to feature.
    The latest creation to be tacked onto the list is quite possibly the most interesting car I’ve seen in recent memory. When I finally landed at the bottom of the thread there were two images attached that were scarcely larger than thumbnails. The images depicted a car that could only be described as a work-in-progress, but already I could see the potential oozing from the pixels.
    As an American, the thought of a Lancia Delta Integrale even in stock form is an exotic delicacy. To have the chance to witness, let alone photograph, something of this scale is a once-in-a-lifetime opportunity. At this point I still had no idea who would be shooting the car, and as my colleague Mr. Dalle Carbonare is of course very Italian, I would have happily grudgingly gifted the opportunity to him.
    Had I any idea how little the already obviously extreme exterior was giving away, perhaps I would have called dibs right there on the spot. But rather than trying to stake my claim to the car, I let out the only response my fingers could muster. “Whoa”, I typed, “Epic Lancia is Epic!” What I didn’t realize was how epic the car Peter Pentell had built truly was.
    When I arrived at Gröndal my body and mind weren’t exactly sure what the hell was going on. The last thing I remembered was meeting up with the rest of the Speedhunters and special guest Miura-San in the hotel lobby before traveling some amount of time (the exact passage I’ll never know as, in rare form, I slept in the car on the way to the circuit) and abruptly arriving in a forest that conveniently had a tarmac ribbon dissecting it.
    As our car came to a halt I wiped the sleep from my eyes to get a better look at the Speedhunters’ new test and photography track, which on this occasion was filled to the brim with feature cars to shoot. The whole lot of vehicles, which you’ll bear witness to in due time, was impressive to say the least – yet there was one car that seemed to stand above the rest.
    The car was still sitting on the trailer when I got out of the car and put on my jacket. Living in Hollywood I’ve become quite used to bumping into celebrities and acting casual, but there was something about this car that had me – for lack of a better word – starstruck. For some reason I felt as though I couldn’t look it directly in the eye; possibly from fear of ‘meeting your idols’.
    Eventually the car was lowered to ground level where it was being inspected by Kei Miura. Seeing his eagerness to check out the Lancia helped to get me over my stage fright and I moved in closer and started looking over the bodywork. Having seen lots of Gatebil cars in the past I was expecting this build to be a real ‘fifty-footer’ but the reality couldn’t be further from the truth.
    The shape and lines of the bodywork were so clean but curiously exaggerated. Not being an expert on the chassis it was difficult for me to make out exactly what bits had been changed, but I suspected a whole lot of custom work had been performed. I would later find out that virtually the entire exterior of the car save for the door handles and front grill were custom made in a garage. For now however, I was simply admiring the form.
    I’ve often half-jokingly muttered the phrase “I’d rather be lucky than good,” but on this particular occasion it was the truth. I had arrived at the circuit that day without a shadow of a doubt as to which vehicles I would be shooting, but as it turned out, the cards would soon reveal themselves in my favor. The epic Lancia was mine, and it would take a lot more than a little rain to keep me from shooting it.
    After introducing myself to Peter it was time to position the car on track and begin truly familiarizing myself. What I began to understand soon after we parked up was how little Lancia this car actually was and how it was rather a lot more Toyota Supra than anything else. With the bonnet removed for the first time, I started to realize just how #$@*ing mental the Lasupra really was.
    Anyone who is familiar with the Gatebil tuning scene will know that the Supra and virtually all of its component parts are highly valued in Scandinvia, so seeing their turbocharged three liters powering other cars is pretty common. In this particular bay the top of the unmistakable 2JZ doesn’t necessarily slap you in the face, but once you ponder the absurdity of the way it’s been placed the familiar sting sets in.
    The entirety of the engine from the crank-pulley back is now sitting just behind the front axle line. Peter modestly told me he tried to place everything in “suitable locations for good weight-ratio.” I chuckled because I had yet to realize the full insanity that still lay in the voids just begging to be discovered.
    As I hinted earlier, more than just an engine was borrowed from a Supra. You’ll be happy to know the entire driveline including the transmission and rear end have all been pulled from a JZA80. Just for good measure, each component has dedicated coolers mounted in the rear of the car with a channel cut in the body to look after their temps.
    While a standard Supra powerplant would be more than enough to motivate a car of this weight, Peter (being Swedish and all) had other ideas. With help from the 2JZ specialists mentalists at Supramannen Racing, he was able to source all the parts necessary to assemble his automotive perversion. I could dazzle you with a list of components but I fear name dropping would only belittle a build of this caliber.
    Let’s just say that once it’s been properly tuned, this particular motor should be singing a tune somewhere in the neighborhood of a thousand horsepower. An output like that would be right at home as a blurb on the cover of virtually any tuning magazine on the planet, yet it still isn’t what makes this car so special.
    No, for that you’ll have to peer well past the surface, which may be easier said than done. Your first opportunity for a glimpse into the true brilliance of this build is awaiting you on just the other side of the door; all you have to do is gently pry open one of the last remaining OEM pieces of Delta and enter.
    On the inside even a Lancia ignorant like myself can tell that something isn’t quite right here. At first glance you begin to see a complex matrix of pipework in the form of a roll cage, but it doesn’t seem to terminate anywhere. What you’re actually seeing is indeed part safety structure, but it’s also very much the foundation of a home-brewed spaceframe.
    Taking a good look around the cabin reveals a level of detail and obsession that looks a lot more like a factory works effort of the period rather than some sheet metal thrown together by a guy in a shed. Yet in reality only the latter is truth, and the hard work has done an excellent job at hiding the fact that this Lancia is nothing more than an impostor – a roof skin scantily placed atop a fantastic jungle gym.
    The seating position is nothing less than ideal and has been shoved about as far back as it can go, with the driver’s shoulders slightly rearward of the B-pillar. Although I didn’t actually take a seat inside the car, I can quite easily imagine the false sense of immortality that such a throne might induce. For anyone who’s driven a car in anger, the view forward is one to die for.
    Just outside of the pilot’s peripheral vision are yet even more man hours of fabrication. To make up for the revised seating location, custom pedals have been used and mounted nearly a foot aft of their original home to accommodate the rearward bias. Just to the right of the driver’s throttle leg is the massive transmission tunnel, and atop of that a collection of electronics resides.
    All of the instrumentation, of which there is relatively little when comparatively speaking, have then been arranged in a driver-centric array – one of the many luxuries of building a completely bespoke car. Everything that isn’t immediately pertinent to the driving experience has been placed on a secondary parcel that lies yonder of the gauge panel just out of sight.
    While we could quite happily end on that note, there are still many other pieces obscured from the driver’s seat that makes this car even more extreme. Sure the power train, cockpit and bodywork are magnificent in their own account, but the underpinning of the whole build is possibly the most impressive thing I’ve seen in some time.
    In 2011, starting with a jig, a saw and the body of a Delta he had owned for a decade, Peter suffered from what I can only presume was a mental breakdown. From there he hacked the lid off the poor Lancia and slid it over the top of a metal frame. He then meticulously added bits of metal which eventually constructed a frame. At the four corners of this grid work lay a set of Supra uprights.
    From this skeleton the madman went to work, intersecting lines and tigging them in place. At some point he must have realized that he needed to utilize a shock absorber of some type but clearly forgot to allocate an appropriate space for them. Either that, or he really is a genius. Regardless of the reasoning, Peter made the decision to mount a set of four-way adjustable racing dampers completely inboard, actuated by push-rods.
    While this type of elaborate suspension is commonplace in hypercars and at the pinnacle of motorsport, I don’t know too many guys firing up their welders and giving something this sophisticated a go in their garage. With the brunt of the suspension taken care of, there were still a few loose ends to tie off, like what type of sway-bar to use.
    If history has taught us anything about Peter he surely wouldn’t take the easy route. In the end a five-position driver-adjustable dual-knife set-up was utilized; I suppose anything less would be uncivilized. The lever system sits adjacent to the shifter ready to be fine-tuned at a moment’s notice should weather or other conditions require an immediate change in set-up.
    To call the build merely inspirational would be an insult. While I’m sure there will be some people out there thinking “Why on earth would anyone do this?”, I can’t help but think “why on earth aren’t more people?”.  Not only is it one of (if not the) most inventive cars I’ve ever had the pleasure of photographing, it’s also almost entirely garage-built by the owner.
    For a long time I’ve been a firm believer in the idea that you can do anything you put your mind to, but the simple fact of the matter is that most people never put theirs to it. Seeing this kind of perfectionism harbored under such modest conditions was a welcomed slice of humble pie. I believe I wasn’t alone in leaving the circuit feeling inspired that day.
    Over the course of the weekend the Speedhunters crew was able to see the car make its maiden voyage on track at Gatebil Mantorp Park. It was only then that Dino finally got a good look at the stunning creation. After a great deal of contemplation and discussion, we eventually arrived at the conclusion that after nearly twenty years of combined experience as automotive journalists, this was quite possibly the most radical thing either of us had ever seen.
    Yet what it is exactly I’m still not certain. This is not a car, of that I’m sure; it’s the physical manifestation of creativity, patience, skill and hard work. In many ways I would argue that this automotive expression is actually art, yet at the end of the day that still doesn’t feel quite right. No, there’s really only one way to describe it.
    Epic Lancia is, for lack of a better phrase… epic.


    1992 Lancia Delta Evo1 “Lasupra”
    Engine3.0L European-spec turbocharged 2JZ-GTE, SMR valve work and 80mm turbo plumbing, custom machined and shortened throttle body, Skyline GT-R intercooler and radiator, TiAL dumpvalve, Meziere electronic water pump, custom stainless 90mm exhaust with one 4″ race catalyst and two small mufflers, heavy-duty oil cooler and sandwitch adapter with thermostat, AEM EMS  tuned by SMR w/ AEM boost control and A/F system, STACK dash display with sequential shift lights, three-bar boost gauge, EGT, FIA main power control system
    DrivelineSupra V-160 six-speed gearbox, automatic Supra rear axle w/ 4:27 ratio, Supra driveshafts, TRD LSD, Nissan s13 rear diff oil pump, aluminum flywheel, upgraded clutch, custom propshaft made by Svea Kardan, gearbox and diff fluid oil-cooled by 13-row coolers
    Suspension/BrakesÖhlins five-way TT40 dampers w 18k/10k spring rates (f/r), pushrod system adjustable in three steps with separate adjustment for ride height, five-way cockpit adjustable double knife swaybars, fully adjustable spherical bearing front and rear arms, Supra suspension geometry adjustable in two steps depending on tire size, fully adjustable roll center, bump steer, camber, caster, Porsche 997 Carrera steering rack, Volvo v50 electric steering pump, Brembo GT big brake kit w. 6-/4-pot calipers (f/r) and  355/345mm floating rotors (f/r), Tilton hanging brake pedals w/ 1:7 pedal ratio, custom space frame built to accept Supra driveline and suspension, air jacks
    Wheels/Tires18″ XXR 527 wheels, 25/64 (f) and 30/68 (r) Michelin Porsche GT3 Cup slick tires
    Exterior
    Custom designed body made in fiberglass with help from AJO Racing and brother Jonas including fenders, bumpers, side rockers, hood, tailgate, roofskin, flat underbody and rear diffuser, two-door conversion using custom doors that are 150mm longer and 75mm lower, Ultima GTR carbon fiber rear wing, Lexan side and rear windows
    InteriorSparco rev seats w/ harnesses, Sparco steering wheel w/ racing quick release, custom built cage and consoles, transmission tunnel
    Special Thanks
    Auto Experten, Magic energy drinks, SMR, Alltilego, Eastandsthlm, AJO Racing, PE-WE billackering, NOMO kullager, Brembo for the great technical support, Sulzer Metco, Bygg rätt i Nortälje AB, Forsman-motorsport, Stancetech.se, Palle for all the time spent in the garage to help me finish the car for this! And of course Kocken, Maccan, Martin, Tuomas and all the rest of my friends at Alive.se!