ACE CAFE RADIO

    mercredi 18 décembre 2013

    1988 PORSCHE 959


    Porsche 959 front side Fotor 740x557 1988 Porsche 959
    Calling the Porsche 959 an icon is an understatement of pretty significant proportions, it’s a car that would fundamentally change all supercars that came after it, making NASA levels of technology and materials the new normal and speeds in the 200mph range a road legal reality for the first time.
    The basic idea behind the 959 began in 1981 shortly after Porsche’s new Managing Director Peter Schutz had settled into his new office. Porsche’s head engineer Helmuth Bott approached Schutz with some ideas for the new 911, a car that would be advanced enough to continue competing with the likes of Ferrari, Lamborghini, Aston Martin, Jaguar and its other long time rivals throughout the 1980s and beyond.
    The two men worked on the concept for months, they realised that a racing program was the best way to quickly develop and fine tune new performance-oriented technologies and so they called their rapidly developing concept car the “Gruppe B”, giving an early indication of the series in which they intended to compete.
    Porsche 959 front Fotor 740x557 1988 Porsche 959
    Despite popular belief to the contrary, Porsche didn’t actually develop the 959 from scratch. The engine and transmission were both pulled from other pre-existing programs which helped to reduce development costs. Much of the development money that went into the car was spent creating the aluminium and Kevlar composite body and light-weight Nomex floor, these contributed to the 959′s relatively light and rally friendly kerb-weight of 1450 kilograms.
    The engine was a flat boxer 6 with air-cooled cylinders and water-cooled heads, it was fitted with twin sequential turbos that largely eliminated the turbo-lag that plagued Porsche’s Turbo 911. The engine was tweaked for years before it was ready for production use and by the time it was installed in the 959 it produced almost 450hp, an astonishingly high figure for any car in the era, let alone one with partial air-cooling and a capacity of under 3000cc.
    By 1986 the Porsche 959 was finally ready for public consumption, it would be sold for 3 years until 1989 and a total of 337 would be built (including prototypes). It’s said that for each one that was sold, Porsche would lose $250,000, making the MSRP of $225,000 seem almost reasonable. Many consider the 959 to be Porsche’s greatest gift to its fans but in reality, the modern 911 Turbo is a direct descendant of the 959 development program and actually has more in common with the 959 than it does with the original 911.
    The value of these cars now has climbed steadily and a well-cared for example like this will sell for somewhere in the region of $1 million USD, if that sounds reasonable to you, you might want to click here to visit the car’s listing on RM Auctions. It’s due to be auctioned on the 16th of January 2014, meaning that you’ll need to save that Christmas money.
    Porsche 959 interior 2 Fotor 740x554 1988 Porsche 959
    Porsche 959 interior Fotor 740x554 1988 Porsche 959
    Porsche 959 side Fotor 740x555 1988 Porsche 959
    Porsche 959 spoiler Fotor 740x553 1988 Porsche 959
    Porsche 959 back driving Fotor 740x553 1988 Porsche 959
    Porsche 959 back Fotor 740x550 1988 Porsche 959
    Porsche 959 driving Fotor 740x555 1988 Porsche 959
    Porsche 959 engine Fotor 740x554 1988 Porsche 959
    Porsche 959 front side Fotor 740x557 1988 Porsche 959
    Calling the Porsche 959 an icon is an understatement of pretty significant proportions, it’s a car that would fundamentally change all supercars that came after it, making NASA levels of technology and materials the new normal and speeds in the 200mph range a road legal reality for the first time.
    The basic idea behind the 959 began in 1981 shortly after Porsche’s new Managing Director Peter Schutz had settled into his new office. Porsche’s head engineer Helmuth Bott approached Schutz with some ideas for the new 911, a car that would be advanced enough to continue competing with the likes of Ferrari, Lamborghini, Aston Martin, Jaguar and its other long time rivals throughout the 1980s and beyond.
    The two men worked on the concept for months, they realised that a racing program was the best way to quickly develop and fine tune new performance-oriented technologies and so they called their rapidly developing concept car the “Gruppe B”, giving an early indication of the series in which they intended to compete.
    Porsche 959 front Fotor 740x557 1988 Porsche 959
    Despite popular belief to the contrary, Porsche didn’t actually develop the 959 from scratch. The engine and transmission were both pulled from other pre-existing programs which helped to reduce development costs. Much of the development money that went into the car was spent creating the aluminium and Kevlar composite body and light-weight Nomex floor, these contributed to the 959′s relatively light and rally friendly kerb-weight of 1450 kilograms.
    The engine was a flat boxer 6 with air-cooled cylinders and water-cooled heads, it was fitted with twin sequential turbos that largely eliminated the turbo-lag that plagued Porsche’s Turbo 911. The engine was tweaked for years before it was ready for production use and by the time it was installed in the 959 it produced almost 450hp, an astonishingly high figure for any car in the era, let alone one with partial air-cooling and a capacity of under 3000cc.
    By 1986 the Porsche 959 was finally ready for public consumption, it would be sold for 3 years until 1989 and a total of 337 would be built (including prototypes). It’s said that for each one that was sold, Porsche would lose $250,000, making the MSRP of $225,000 seem almost reasonable. Many consider the 959 to be Porsche’s greatest gift to its fans but in reality, the modern 911 Turbo is a direct descendant of the 959 development program and actually has more in common with the 959 than it does with the original 911.
    The value of these cars now has climbed steadily and a well-cared for example like this will sell for somewhere in the region of $1 million USD, if that sounds reasonable to you, you might want to click here to visit the car’s listing on RM Auctions. It’s due to be auctioned on the 16th of January 2014, meaning that you’ll need to save that Christmas money.
    Porsche 959 interior 2 Fotor 740x554 1988 Porsche 959
    Porsche 959 interior Fotor 740x554 1988 Porsche 959
    Porsche 959 side Fotor 740x555 1988 Porsche 959
    Porsche 959 spoiler Fotor 740x553 1988 Porsche 959
    Porsche 959 back driving Fotor 740x553 1988 Porsche 959
    Porsche 959 back Fotor 740x550 1988 Porsche 959
    Porsche 959 driving Fotor 740x555 1988 Porsche 959
    Porsche 959 engine Fotor 740x554 1988 Porsche 959
    Via Silodrome

    Ray Gordon – Reno-Bonneville-Moab-Oregon Coast.




    DUCATI LEGGERO BY WALT SIEGL



     Ducati Leggero by Walt Siegl
    Walt Siegl is, quite deservedly, one of the most famous custom motorcycle builders in the world. Far from the hideous kitch hellscape of the custom stretched out chopper scene, Walt works from his garage in New England and creates some of the most beautiful and technically advanced custom bikes you’ll find anywhere on Earth.
    This bike, the Leggero, is Walt’s first foray into the world of production motorcycles – Each Leggero will be handmade to customer specifications but the essential elements like the frame, engine, tank, bodywork and suspension are all fixed production units built by Walt. This allows the costs to be brought down and makes owning a Siegl bike a realistic aspiration for people like you and me, who perhaps can’t afford a full-on, ground-up custom.
    The Leggero is based around a Ducati 2 valve 900cc v-twin fitted with 39mm Keihin carburettors, the frame is a CAD developed chromium-molybendium unit that weighs in at just 19lbs and the tank/bodywork are made from hand-laid carbon fibre. Suspension is provided by Showa up front and Öhlins at the rear giving the bike some serious track potential for those wanting to do more than park it outside the local coffee co-op.
    If you’d like to order your Leggero you can click the link here to visit Walt’s site and if you’d like to see more from Mr Siegl you can view the Riviera Ducati SS here, the MotoBee here and the WS Sport Classic here.
    walt siegl Ducati Leggero by Walt Siegl
    ducati cafe racer Ducati Leggero by Walt Siegl
    ducati cafe racer 5 Ducati Leggero by Walt Siegl
    ducati cafe racer 4 Ducati Leggero by Walt Siegl
    ducati cafe racer 3 Ducati Leggero by Walt Siegl
    custom ducati 5 Ducati Leggero by Walt Siegl
    custom ducati 6 Ducati Leggero by Walt Siegl
    ducati cafe racer 1 Ducati Leggero by Walt Siegl
    ducati cafe racer 2 Ducati Leggero by Walt Siegl
    custom ducati 4 Ducati Leggero by Walt Siegl
    custom ducati 3 Ducati Leggero by Walt Siegl
    custom ducati 2 Ducati Leggero by Walt Siegl
    custom ducati 1 Ducati Leggero by Walt Siegl
    custom ducati Ducati Leggero by Walt Siegl
    Images and Information – Walt Siegl
    Additional Information – BikeEXIF
    via Silodrome

    Brett Cue ALL IN - Six Hours Of Awesome



    Quite enjoyed this vid. I used to race a Suzuki RM125 many years ago with the same GFX so it brings back some fond memories! “Usually when you agree to a off-road race that lasts six hours late into Fall, fun isn’t always the first thing that comes to mind. Luckily for Brett Cue keeping it fresh and trying something different is what it’s all about for these guys. Check out what 2 strokes and almost 20 laps looks like in smiles for Brett Cue, Joel Ard and Josh Gray.” - See more at: http://derestricted.com/racing/brett-cue-all-in-six-hours-of-awesome#sthash.4B8bEDQb.dpuf


    very ccol Best of 2013 !!

    Les 90 ans du Groupe DURIEU (Owatrol) mis à l'honneur dans ce Best of 2013 !
    --
    Celebrating the 90th anniversary of Groupe Durieu (Owatrol) in this Best of 2013 !



    Nathan’s Balcony-built CX500


    Balcony Build CX500 1
    When Nathan G, AKA “701let” (…no, we didn’t ask) wasn’t beating panels in his day-job in Brisbane, Australia, you might have found him out on his front balcony, building this CX500 custom cafe racer over a “grueling’ six months. Battered by howling winds and hungry mosquitos in limited space was a test of endurance, but it also gave rise to the bike’s nickname; “Howler”. Nathan adds; “I could also call it the splutter, as my carbs desperately need a tune.”
    Balcony Build CX500 2
    “I don’t have a garage and I cant keep myself from modifying things. So I took all the furniture off the front balcony and started stripping down my first motorbike. You realise pretty quickly how little room you have once the bike is entirely in pieces.” Nathan also wanted to have something out of the ordinary; “I could have bought an R1 just like every other man and his dog, but I wanted my first bike to be out of this world”.
    Balcony Build CX500 3
    The bike is a 1981 Honda CX500 and was found on Gumtree, wearing a sheepskin seat cover and ‘rancid‘ high ride bars. Nathan felt he owed the bike some dignity. “My vision came from working on cars for the past 10 years, It was a cross pollination of ideas taken from different cars I had worked on. Trying to keep everything to as tight a budget as possible. I had just about searched every motorcycle on every website and had taken a lot of inspiration from vintage cars in the 50′s/60′s. I wanted it to look restored but still maintain some of the old rat look without making it a rat bike.”
    Balcony Build CX500 4
    After being completely stripped, every part of the bike was cleaned, sanded, painted, machined and then hacked to pieces or welded-up. The frame was cut four inches shorter under the seat. “The seat was then custom made by laying my own fibreglass seat pan and design a hook and leather strap method to hold it in place.” Nathan goes on to give some good advice, learned the hard way; “…Always make your fibreglass seat pan before you paint the frame. I cant tell you how much of a pain in the ass it was to paint it a 2nd time.”
    Balcony Build CX500 5

    “The engine was finished in high temp wrinkle coat with the shaved in logo, which I had taken from the old Honda car engines. The pipes were the hardest to deal with as I wasn’t certain how I wanted them to go. I have always liked the scrambler look and the CX500 is such a heavy looking bike that I felt I needed to take some weight out of the design. With the pipes up nice and high it also shows the engine and shaft drive off a bit better. The engine almost looks like a bomb or and old school jet engine or something. Hanging as low as it does.”
    Balcony Build CX500 6
    The scrambler pipes and old school leather belt are Nathan’s special touches. “The belt is to signify the vintage car scene. The same way we used leather bonnet straps on the old race cars of yesteryear. There’s nothing better than old leather and steel.” The final paint finish is taken from a BMW 7 series car – “All Class” as Nathan wanted a “Gentleman’s look“.
    Balcony Build CX500 9
    We asked how she rides, and Nathan tells us that the torque from the transverse V is immense and he loves the sideways torque reaction from the shaft drive when he pulls away, but then his last bike was a 125cc, so he admits that after that, anything will seem fast. Getting your chest and chin on the tank also helps…
    Balcony Build CX500 10
    Nathan has now got the bike building bug, so his balcony can look forward to accommodating a CB750F Supersport and then another CX500. We can’t wait to see them. Cheers for sharing with us Nathan.
    Thanks to Chad’s Photography for the Photos.

    photo ...