ACE CAFE RADIO

    mercredi 12 février 2014

    BMW K100 CAFE RACER


    bmw k100 cafe racer 8
    The BMW K100 is not a motorcycle that one usually associates with cafe racers, or customs of any sort for that matter. The bike itself is a fascinating piece of BMW Motorrad history and surprisingly they remain quite cheap in many markets, despite their recent ascent to vintage status and the huge popularity of the German marque’s earlier air-cooled models.
    In the early ’80s BMW engineers were faced with a continuing challenge from their Japanese counterparts, 4-cylinder, water-cooled engines were becoming commonplace and the performance improvements had seen many previously die-hard BMW fans buying Hondas, Yamahas and Suzukis.
    The solution to this, the Germans realised, was to develop a flat four of their own. Rather than starting from scratch a 987cc car engine that was in use by Peugeot was sourced, the engineers decided to lay it flat on its side to lower the centre of gravity and allow the crank to line up nicely with the drive shaft on the right hand side. Some minor modifications to the engine were needed to avoid oil starvation and to make certain that the emissions would pass the relatively strict EU testing that was being implemented in the same era.
    By 1983 the all-new BMW K100 was ready and was released to the general public, its reception was a little tentative at first, the orientation of the engine was something that no-one had seen since the days before WWII, but by the mid-80s the bike was a resounding success.
    It would stay in production with only relatively minor modifications from ’83 to ’92 and it would go on to be used as the base for the BMW K1, a personal favourite from the decade of synth-pop and day-glo. Today, over 20 years after the bike was taken out of production, there remains a huge number of them on the road, a testament to their longevity and broad appeal.
    bmw k100 cafe racer 6 740x494 BMW K100 Cafe Racer
    The K100 you see pictured here is the work of Vibrazioni Art Design, a small Italian furniture atelier that specialises in hand building arm chairs, cabinets, tables, stools and anything else you can imagine from old discarded oil drums.
    Before long Alberto Dassasso and Riccardo Zanobini, the proprietors of VAD, decided to turn this knack for recycling industrial waste towards their passion for vintage motorcycles, a 1985 BMW K100 RS was sourced in a nearby town and the build began. The design brief was simply to build a cafe racer in the spirit of the endurance racers of the ’70s and ’80s, a new fuel tank and fairing was hand-beaten from a single oil drum and a half-fairing was added to the front end.
    The rear subframe was cropped and shortened, a new set of performance shocks were added and the front springs were lowered 80mm to tighten them up and lean the bike forwards a little. The original air box was removed and the internal section of the frame was tidied, the original instrument cluster was removed and replaced with a simple speedometer coupled with an on/off switch and a button for the light.
    The final product looks like the sort of thing that Mad Max would have ridden if there was an endurance race after the end of the world, that huge K100 engine looks fantastic with the original fairings out of the way and the tidier, more open rear of the bike looks far better than the original.
    If you’d like to see more from Vibrazioni Art Design you can click the link, and if you’re anything like me you’ll spend the next couple of hours trawling eBay looking at K100s and trying to convince the Mrs that you really do need one.
    bmw k100 cafe racer 740x494 BMW K100 Cafe Racer
    bmw k100 cafe racer 5 740x494 BMW K100 Cafe Racer
     BMW K100 Cafe Racer
     BMW K100 Cafe Racer
    bmw k100 cafe racer 1 740x494 BMW K100 Cafe Racer
     BMW K100 Cafe Racer
    bmw k100 cafe racer 4 740x494 BMW K100 Cafe Racer
    bmw k100 cafe racer 3 740x494 BMW K100 Cafe Racer
    bmw k100 cafe racer 2 740x494 BMW K100 Cafe Racer
    bmw k100 cafe racer 7 740x494 BMW K100 Cafe Racer
     BMW K100 Cafe Racer
    Via SILODROME

    Renault KWID Concept. Drone-ing on


    Renault KWID Concept 02
    Described as a ‘robust yet joyful vehicle’, the new quirkily titled KWID Renault concept is – as you might expect – totally batshit.
    The styling of the crossover has the traditional concept car proportions, the radical bodylines, gullwing doors, extended wheel arches and front-centre driver seat decked out in two-tonne grey and yellow paintwork. The interior meanwhile may look like papier mâché but is actually designed to look like a bird’s nest. We can only imagine the comfort.
    Renault KWID Concept 03
    The other big talking point is, what Renault calls, a ‘Flying Companion’. Said drone, a miniature helicopter with attached camera, can be used to scout ahead for traffic and/or road obstacles. This ‘Bollywood-themed’ Renault – courtesy of design input from the French marque’s Indian division – is complete with the now traditional hybrid powerplant, chief of which is a 1.2-litre turbocharged petrol engine.
    Production plans? Don’t make me laugh. On the other hand, the success of the Ren-Dacia-ault Duster in India has not been lost on the company, meaning the KWID could prove the genesis of a crossover SUV in the future. In the meantime, why not check out how the concept model went from design easel to Motor Show stand.
    Source – Renault


    Renault KWID Concept 01




    See how Renault Kwid concept car was designed, under the crook of Laurens van den Acker, Renault head designer. 

    // Découvrez la genèse Design du concept-car Renault Kwid sous la houlette de Laurens van den Acker, directeur de Renault Design.




    The concept car Renault Kwid features a flying companion, the first in the automotive world, for a safe and enjoyable driving experience.

    // Le concept-car Renault Kwid est équippé d'un "compagnon volant", le premier dans le monde de l'automobile pour une sécurité et un plaisir de conduite accrus.




    Renault KWID Concept 06

    SUZUKI KATANA BY MOTOHANGAR


    2006 Suzuki Katana
    When we heard that Motohangar had ripped the bodywork off a Suzuki Katana, we were dismayed. After all, the Katana is one of the most iconic motorcycles ever made.
    But then we found out that Patrick Jones and crew were revitalizing a 2006 Suzuki Katana, not one of the 1980s originals. A little research revealed that the name was revived in the USA for the GSXF range, a series of bland sport-tourers with none of the angular magic of the original.
    2006 Suzuki Katana
    “This one came to us from one of our first clients,” says Patrick. “He got a CB750 from us a while back, and then wanted something as a daily driver/commuter. So he bought a Katana, and asked what we could do with it.”
    “We wanted it to have a mix of old and new flavors,” says Patrick, “and a bit of ‘industrial urban assault’ styling!” To get the right aesthetics, Motohangar went for bare metal and minimal paintwork, plus aggressive-looking Avon Distanzia tires. (“They seemed to really pull the look together.”)
    2006 Suzuki Katana
    The budget was small, so the huge seat was given a starring role and the taillights were fitted underneath, after a little subframe modification. The stock GSXF tank was stripped back to the metal, and minor black detailing was added elsewhere for a monochromatic look.
    A shortened FMF exhaust system suits the style of the bike and was a major part of an overall weight-reduction regime. The rest of the work was relatively straightforward: relocating the battery, adding pod air filters, and re-jetting the carbs for maximum performance.
    2006 Suzuki Katana
    To improve the stance of the Katana, Patrick lowered the front end a tad, and then added Vortex clip-ons and a GT380 headlight. And it looks good. Maybe not as arresting as the original German design, but a helluva lot better than the starting point.
    “It was refreshing to work on this bike,” Patrick comments. “We’ve been doing a lot of CBs and 70s bikes, so this was a change of pace and we’re proud of the final product.”
    2006 Suzuki Katana
    If you’ve ever seen a GSXF ‘Katana,’ you’ll know that Motohangar has done an amazing job.
    Got a taste for 1980s styling and the best part of $50,000 to spare? Then check out theresto-mod Katanas available from the Japanese shop AC Sanctuary.
    via BIKEEXIF

    OLYMPIC COLD

    Garb: Olympic Cold


    Don't let your style get lost in translation like Russia's Olympic slogan.

    Ryno Microcyle. The answer to Segway face plants


    Meet the Ryno Microcyle, a Segway with a seat, a 16kph top speed and stonking set of bull bars
    Ryno-Microcyle-crankandpiston
    If any of you have tried riding a Segway, you’ll know it’s more difficult than it looks (just ask Jimi Heselden). Lean too far forward or too far back, your belief in gravity will disappear and your faceplant will hit YouTube under the heading ‘Epic Fail’. This pretty badass edition then might be what you’re looking for to put those jittery knees to rest.
    Okay, technically this isn’t a Segway. Its full name is the Ryno Microcycle (so called because it’s got one wheel and presumably gives you the horn if mounted the right way). What makes the Ryno a credible option – aside from the bull bars on the front, the purpose of which we’re still not clear on – is the seat. The gyroscope in the wheel still does most of the work and the handlebars are just for sure. But wouldn’t you prefer to sit down if you’re an inch away from going arse over elbow?
    Top speed is 10mph (16kph) – or ‘the pace of a very fast run’ apparently – and range is 10m (16km). Anybody got a spare $5300? We’re keen to see how many laps of the crankandpiston office that is.
    Source – Ryno Motors

    petit déjeuner