Deus Ex Machina are back with a brand new custom build for Yamaha. This time the cult Italian builders have turned their attention to the iconic Yamaha SR400.
vendredi 1 août 2014
Motoped with Pitster Pro 155z HO engine
Finlande 1984 : Première victoire de la Peugeot 205 T16
Dimanche 26 août 1984, à Jyväskylä, le Finlandais Ari Vatanen offrait le premier succès mondial à la Peugeot 205 T16/Michelin après une rude bataille contre les Lancia 037 Rally de ses compatriotes Markku Alén et Henri Toivonen.
Après des débuts probants en mai 1984 au Tour de Corse (4e avec Jean-Pierre Nicolas), la Peugeot 205 T16 a essuyé son 1er échec sur les pistes défoncées du Rallye de l’Acropole où Ari Vatanen (moteur) et JP Nicolas (transmission) ont tous deux abandonné.
Absente en Nouvelle-Zélande et en Argentine, la Peugeot 205 T16 réapparaît en Finlande au cœur de l’été où un seul exemplaire est engagé pour Ari Vatanen, 32 ans, vainqueur de l’édition 1981 et sacré champion du monde cette année-là. Le directeur du team Peugeot Talbot Sport, Jean Todt, s’en expliquait : « 1984 est une saison d’apprentissage et nous sommes-là avant tout pour développer la voiture. Le Rally des 1000 Lacs est une affaire de spécialistes et nous avons choisi Ari, qui connaît parfaitement cette épreuve, pour nous aider dans cet objectif. »
Face aux trois Audi Quattro officielles (Mikkola, Blomqvist, Mouton), aux deux Lancia 037 Rally usine (Alén, Toivonen), aux deux Toyota Celica Twincam Turbo (Waldegaard, Kankkunen), aux trois Nissan 240 RS engagées par Nissan Europe (Airikkala, Pitkanen, Kaby) et à quelques « privés » très affûtés (Per Eklund, Lasse Lampi sur Audi), les chances de Peugeot sont relativement maigres. Mais l’équipe française a tout de même bien préparé cette course avec une longue séance d’essais « suspensions » menée sur place en juillet, sous la houlette du directeur technique Jean-Claude Vaucard.
Après un meilleur temps de Blomqvist et quatre d’affilée de Markku « Maximum Attack » Alén, Ari Vatanen remporte l’ES7, Poikuskulma (6,35 km). Alén conclut la 1ère journée en tête, mais le lendemain, Vatanen réalise un festival au volant de la Peugeot 205 T16/Michelin : il signe huit meilleurs temps consécutifs, ne laisse que deux spéciales à ses adversaires et s’empare des commandes du Rally des 1000 Lacs à l’issue de l’ES13 pour ne plus les quitter.
Meilleurs performers du rallye avec 31 spéciales remportées sur les 51 au programme de cette 34e édition, Ari Vatanen et Terry Harryman offrent la 1ère victoire mondiale à la Peugeot 205 T16 et la 40e à Michelin. Le constructeur français renoue ainsi avec le succès en WRC six ans après son dernier triomphe, au Safari Rally 1978 (Nicolas/Lefebvre, Peugeot 504 V6 Coupé/Michelin).
Ce fut la 1ère des 16 victoires WRC de la Peugeot 205 T16 gagnées en seulement deux saisons et demie. Deux mois plus tard, Ari Vatanen a remporté le Rallye Sanremo sur les terres des Lancia 037 Rally, puis le RAC Rally fin novembre, avant d’entamer 1985 par un succès au Rallye Monte-Carlo.
La Peugeot 205 T16 a offert deux titres Constructeurs à Peugeot et à son partenaire Michelin. Mais jamais le « Grand Blond » ne fut sacré à son volant malgré ses cinq victoires en sa compagnie…
NORTON COMMANDO TRACKER BY FEDERAL MOTO
The Norton Commando is a motorcycle that I have a lot of time for, many consider it one of the greatest motorcycles of all time and I’d be inclined to agree pretty enthusiastically.
Originally introduced in 1967, the Commando won worldwide acclaim that continues to this day, it won the coveted Motor Cycle News “Machine of the Year” award for 5 straight years from ’68 to ’72 – staving of stiff competition from the new generation of motorcycles coming out of Japan.
The custom Commando tracker you see here is the work of Federal Moto, a relatively new Canadian custom motorcycle workshop based in Edmonton, Alberta and run by Justin Benson, Randy Venhuis, Shaun Brandt, and Kyle Nichols.
The expansively detailed write up the team at Federal Moto did for this bike is so good I’ve decided to post it here unedited. It covers every aspect of the build from start to finish and should interest those of you who want to know exactly what goes into building a custom motorcycle to this level.
So depending on the time of day in your part of the world, go make yourself a coffee or open a beer, then scroll down and have a read.
“We found this 1974 Norton Commando 850 on a farm in Rimbey, Alberta. It ran, barely, and had a ton of attitude. We wanted to create a surf style tracker that you could ride around the city, or cruise through the rockies all the way to the coast. We only had one condition: maintain the soul of the classic design and feel that Norton had built 40 years ago. We made some major design changes to the shape and feel of the bike, but the spirit is all still there. We can only hope that the employees at Norton would be fighting each other to take it for a spin if it rolled onto the factory floor.
We began by taking the bike down to the frame. Norton Commandos have a very thick centre tube that slants downward towards the tail of the bike, making it very difficult create the perfect line we wanted from headlight to taillight. First step was cutting the rear section of the centre tube out and re-shaping the frame to have one clean line. It took some engineering, but we’ve welded and formed the frame to be just as strong as the original. After that we shortened the frame by 18 inches in order to sit just in front of the centre of the rear wheel, and shaped a new rear hoop. This was the beginning of tracker shape we were going after.
Once we had the frame shape settled, we got the wheels back on to gauge how beefy we could go with tires. We settled on 2x19inch Coker Diamond Tread tires that truly captured the era of the bike.
Once we had the shape and height of the bike down, we began chopping off every piece of excess from the frame and the original parts. This included all tabs, oil tank mounts, original fender mounts, centre stand, rear foot peg mounts, chain guard, battery box; anything that didn’t make the bike run. We cut nearly 30 lbs of weight. Before sending the frame to powder coating, we mounted brackets for our 71’ Norton oil tank, formed our seat pan, and machined mounting brackets for the fenders, lights, exhaust, and ignition.
Any original parts that were salvageable were sanded and polished in-house, restoring them to their original state. Any Norton parts that we needed to replace, were obtained through local British bike guru John Oland. This build would not have been possible without Johns unmatched willingness to share his knowledge of vintage motorcycles. The guy is a legend.
The engine itself is all original, aside from an electronic ignition. We pulled it completely apart and inspected, cleaned and polished everything, got the valves dialed in, bored the pistons, and replaced the piston rings. Well worth it considering it’s got more compression than an industrial trash compactor.
Once we had the frame and wheels back from powder coating, we began assembly, and the detail work that makes The Ace the bike that it is. We got some mid 50’s Triumph Fenders from a junk pile, chopped them up, shaped them, and re-finished the paint matte black. For exhaust, we purchased 71’ Norton Commando SS pipes and chopped about 12 inches off of them before wrapping them and attaching 17” Reverse Megaphone cone exhaust from Modern Motorcycle Company out of Australia.
For lights, we went with 4 bullet signals and a bullet brake light, finishing it off with a 5 ¾ inch black headlight, substantially lowered to keep our line. These were all wired through the new wiring harness we created and hooked up to a new Antigravity 4 cell battery tucked under the seat. We got rid of the tachometer and replaced the speedometer with a mini version of the Smiths speedometer that can be seen on many vintage british bikes. The speedo housing was machined in house.
For switches, we got rid of everything original and drilled out the bars to install 12mm push buttons for the signals and horn, cleaning up the front end substantially. We then drilled a hole in the headlight housing and installed an on/off switch so that the 4 cell battery had enough power to kick-start the bike (as opposed to having the headlight on when the key is turned on). All of this was brought together with a BSA A10/A65 Low handlebar, sticking to the bikes British roots. Other final touches at this stage included 1970’s Tommaselli Natural gum rubber grips, ordered direct from the factory in Italy, and simple footpegs machined in house. We kept the original rear brake and replaced the front with a Tokico 2 Piston front brake and Katana 750 Rotor. We also machined a new bracket off of the forks to mount the new brake assembly.
The final pieces were the gas tank and seat. We designed a 2 tone italian leather seat, sewn to perfection by local upholster Tyler Wheeler, keeping the transition seam angled in-line with the frame piece that sits below it. For the tank, we sandblasted it, fixed all the dents and repainted it off-white with an original gold vinyl Norton logo. Last but not least, we sanded the crud off of the gas cap and coated it flat black to pop off the tank.
In the end, we could not be happier with our first build. We’re extremely excited to continue creating functional, one-of-a-kind machines for passionate riders.”
If you’d like to stay in the loop with new builds from Federal Moto, you can follow them on Instagram, Twitter or visit their website here.
via SILODROME
KASPER’S CB350
Riding or building a bike can seem a lonely game, deserted in the shed or solo in the saddle. But it doesn’t have to be, as with everything, it is better when done with mates. Meet Kasper Andersen and his lovely CB, the fourth bike to feature on the Bikeshed from the third pair of hands that share the same workshop. Kasper used to tinker with old Porsches and Volkswagens with Jesper, boyfriend of Bikeshed Heroine Helle. Jesper was the first of the space sharing trio to roll two wheels instead of four through the door with his Cb400, this was hotly followed by Helle and herGN 250 and gorgeous Creme Diamond. Now Kasper has kept up the quality of the output, loosing his first build onto the streets of Copenhagen, a city boasting the Wrenchmonkees and a complete grasp of the custom ride vibe.
The 1973 CB350 rolled into the workshop in a sorry state, the pervious owner had attempted to implement a cafe racer conversion, the extent of which involved messing up the Keihins, a bar swap, ill conceived knee indents and a coat of rattle can black. Nothing met Kasper’s standards so he started from scratch. “I wanted something that stood out but still retained a somewhat original old school look”.
He started by cutting the rear of the frame and adding a kicked loop fabricated from flat iron. A new custom seat was manufactured by friend Helle under her new seat building venture Bang Seats, the ribbed brown unit sits snugly within the revised parameters. We can only hope that in this case she did not tear the leather from Kasper’s sofa as she did with her own XS250!
The botched tank needed replacing but alas the replacement found had also been treated to a self spray. After dipping the new tank in acetone Kasper discovered the lovely 70′s avocado green scheme that had been scrubbed back to accept the boring black overcoat. A fruitless search for the original colour codes led to a different approach, “I carefully sanded the tank down all over still keeping the original colour, then I painted the original decals right on the tank and coated it with 5 coats of clear..”
CB450 forks with period shrouds and upgraded springs improved the suspension and lend the front the old school look Kasper craved. The style defining Firestone Deluxe tyres in 4.00-18 and 4.50-18 were picked up new and cheap but created a dilemma after fitting.
“I used a couple of days staring at the bike and found out that it looked like it was hit from behind.. I then knew i had to extend the rear swingarm 2.5″.” Kasper undertook the alteration and achieved perfectly the proportions and dynamics he was looking for.
The original CB350 headlight was deemed too cumbersome so was replaced with the smaller and cleaner unit from a familial CL175 and given a European yellow tint. Tommaselli vintage grips and bars take care of the bike/rider interface.
With the fruits of his labour meeting his visual approval Kasper took the machine out for a well earned spin, “I drove it for 2 days.. And then what.. I found out the engine was shit.. Instead of rebuilding the engine completely I found a factory rebuilt unit 25years old, this engine had the sharper K0 cams.” Kasper then treated the new engine to a set of Mikuni VM30 roundslide carbs and an optical ignition. The bike reportedly now runs sweetly and has lots of punch.
The CB350 is a proven donor for the vintage modified look with bikes from the likes of Untitled, Analog, the film version of The Girl with the Dragon Tattoo and now Kasper’s incarnation showing how fine the classic silhouette can appear when de-cluttered and tended.
After putting 1500km on the bike in 2 months Kasper decided to put the bike up for sale through the Bikeshed classifieds, it sold within 2 days to a lucky Austrian. Now the shared workshop hosts a 71′ XLCH Harley Sportster that is receiving Kasper’s daily attentions. We look forward to seeing which is the first of the trio to get their next build out the door, into the world and onto the Bikeshed. Any thoughts on a name above the door?
via The Bike Shed
A visit to Meertz World of Time in Munich
Watch collectors around the world rely on the knowledge of Ralf Meertz and his team. Many use their holiday or business trip for a visit to Prannerstrasse 13 in Munich, where Meertz World of Time can be found, since there are always some intriguing rarities in the skilled watchmaker’s collection…
A journey through time via the history of the clock
The world of classic watches, Rolex in particular, has evolved in recent years to become big business. Many are now seeking a slice of this profitable cake, with some entrepreneurs seeing classic watches as simply a means to make money. With some of them, you get the feeling they’d sell their grandmothers if they could make a quick buck. But not Ralf Meertz and his crew: the cozy showroom in the heart of Munich is exactly as you’d imagine a watchmaker’s to be. Priceless clocks tick softly, and bookcases are packed with literature demonstrating a genuine interest in the history of time. Working in concentrated silence, a watchmaker focuses intently on the intimate workings under his magnifying glass and, as soon as the door clicks shut behind you, you find yourself on a horological journey through time.
Ticking rarities in the heart of Munich
On closer inspection, it becomes clear that Meertz World of Time is not an everyday watch shop. At the core of the business are a young team of experts and watches of such rarity that they’d normally be found only in private collections. “My love for antique timepieces was aroused during my time at 'Antike Uhren Schley', which specialises in ancient and complicated watches,” explains the trained watchmaker Ralf Meertz. In his years there he acquired the knowledge necessary to establish his own business in 2003 – a time when collectors were increasingly focusing on rare and historic watches from IWC, Rolex, Panerai or Heuer. Meertz shares this passion, and decided to specialise only in the rarest items. In time, Ralf Meertz and his team built a reputation as a reliable partner in buying and selling high-value antique timepieces – often over the 50,000-euro threshold. Meanwhile, customers from all over the world buy from the Munich business via the Internet. “Confidence is the key to a good relationship with a customer,” says Meertz. This is not mere rhetoric, but a matter of attitude. “If you decide you don’t like the watch, for whatever reason – maybe your wife would prefer to spend the money on a holiday instead – we’ll refund the purchase price for up to four weeks after selling.”
Originality is everything
Ralf Meertz measures the value of a watch by its originality and condition. Prices for vintage watches, straight from brands such as Patek Philippe and Rolex, are known to reach dizzying heights but, for Meertz, their condition plays a central role. “It’s similar to the market for classic cars – it’s originality that counts. Unfortunately, comparable barn finds are discovered only very, very rarely...” But the watch specialist does remember one very special piece: “I was once offered a historic Panerai Kampfschwimmer watch from the Second World War by an elderly gentlemen. The fact that he had owned this watch during his time in the military made it historically fascinating.” It’s stories like this that repeatedly send Ralf Meertz and his team in search of unique timepieces. In this small ‘watch universe’, you feel the passion emanating from the small mechanical marvels that fill the showroom. And as Ralf Meertz puts it, “You can look at a watch, and even inspect it under the microscope but, at the end of the day, it still has to feel right.”
Photos: Jan Baedeker
You can find classic watches from Meertz World of Time in the Classic Driver Market.
Guess who just bought 543 classic cars in one go?
Imagine if your love of classic cars – especially Jaguars – was so overwhelming that you acquired not 10 or even 20 of them… but 543. That’s the number of mainly British classics amassed over the years by private enthusiast James Hull – and guess what? Jaguar Land Rover has just bought the lot.
From the SS100 to the D-type
It is, says Jaguar, “the largest-known privately owned collection of British classic cars in the world” and most of them are Jaguars: from an SS100, a rare alloy XK120, through to early E-types and a MK X once owned by Sir William Lyons himself. Plus there are early Swallow Sidecars and Swallow coachbuilt Austin Sevens, C- and D-types, 19 XJS models and more than 20 XJ saloons with “interesting and famous” previous owners. We’re told that the majority are in truly outstanding condition.
History is everything
So why does the great British marque want to buy so many of its old classics? Well, heritage is big business these days, with many top manufacturers keen to remind young buyers of the glorious past. The cars will be maintained at JLR’s newly created Special Operations division in Coventry (which incorporates the Jaguar Heritage business) and actively used to support the Jaguar brand around the world.
Hull's life's work
According to James Hull, the British car enthusiast, entrepreneur and philanthropist who painstakingly assembled the collection, “Travelling all over the world to build the collection over the years has been a labour of love and a life’s work, so my primary motivation was not to get the maximum price but rather to secure the future of the collection in this country with the right custodian.”
Photo: Jaguar
Would you like to build a Jaguar collection of your own? There are currently 473 Jaguars for sale in the Classic Driver Market.
Inscription à :
Articles (Atom)