YAMAHA XS400 BY HOLD FAST MOTORS

The Yamaha XS400 is a hell of a motorcycle, it was first released in 1977 and it came pre-fitted with luxuries like adjustable rear shock absorbers, self-cancelling turn signals and an automatic petcock. The punchy 392cc parallel twin produces 36hp and feeds that to the rear wheel via a 6-speed transmission and chain drive.

This particular XS400 was built by Andy Hull over at Hold Fast Motors, Andy found the bike for sale by a farmer who’d been letting his kids play on it and as a result, it looked like it’d been picked up and tossed around by an F5.

He decided to strip the bike back to its constituent parts and rebuilt it from scratch, the engine needed a thorough going over. He wanted to give the bike a little additional ground clearance so he moved the rear shock mounts down a few inches, he then added a set of vintage motocross handlebars and a minimalist tachometer above the headlight.

The finished bike was then handed over to the talented pinstripper Jeremy Pedersen of Relic Kustoms, he added some tasteful pinstripes and the Hold Fast Motors logo on the side of the tank. That handsome leather battery surround was handmade by Nick Pedersen, it adds a nice warm tone to the colour scheme and eliminates the unsightly clutter often caused by the electrics.

You can visit Hold Fast Motors here to see more of Andy’s work, we’ll be keeping an eye on him and will feature more of his work as it rolls out of the garage.

from SILODROME

HYOSUNG KARION '07

Spek Modifikasi :

• Body custom by STUDIO MOTOR Custom Bike
• Painting by KOMET STUDIO
• Velg depan 3.00X18 + Ban Shinko SR428 130/80-18
• Velg belakang 4.50X18 + Ban Shinko 180/80-14
• Upside Down Yamaha R6 2009
• Monoshock Ohlins Aprilia RSV-1000
• Master & Kaliper depan Tokico
• Cakram depan PSM
• Raiser stang custom
• Stang Pro Taper
• Lampu depan Aftermarket
• Lampu belakang & lampu sen Aftermarket
• Oil Cooler Satria F-150
• Karburator Keihin PE28
• Knalpot custom by Jet Hot

Salam,
STUDIO MOTOR Custom Bike

Harley-Davidson 'Redhot' Cross Bones by Roberto Rossi

from Twowheelsblog

The 2011 Harley-Davidson Softail Cross Bones (FLSTSB) is the last H-D model to come with a standard Springer front end which, in combination with the fat tires (130 mm at the front, 200 mm at the rear), provides this motorcycle with an image that’s quite reminiscent of the bobbers of the 50s. With that in mind, it is just logical to expect that the customizations of this model would just follow the same style.

Roberto Rossi, a customizer from the Italian town of Mantua, introduces his interpretation of this 2009 Cross Bones, aptly re-dubbed ‘Redhot Bones‘. The first relevant modification concerns the rear, where the 17×6 rim is replaced by a 16-inch one fitted with a 5-inch Firestone ANS tyre. The same tyre has been used for the front too.

Gone are the standard mudguards, though the one at the front comes back properly cut and polished. At the rear instead we get sheet metal shaped by hand to resemble the sporty tail of the Laverda 500 Formula, an old 500 cc racer that the now defunct Italian manufacturer introduced in 1978 to promote its own trophy. The rear section is enriched with fine leather courtesy of Connolly Luxury Leathergoods Limited, the same company that took care of the upholstery on the Rolls Royce Phantom II of the 1930s. The original fat bob tank got replaced with a classic 8-liter peanut one with electric pump, borrowed from a modern Forty-Eight and embellished with the graphics of the 1972 H-D XRTT racer. Nice fishtail exhaust tips complete the looks of this awesome special bike.

"Slotard" by Jesse Rooke Customs

Foto: rookecustoms.com
from Racing Café