ACE CAFE RADIO

    jeudi 27 août 2015

    Travel: Exploring South-Central Alaska in Custom Tundra Buggies


    "Do you know what to do if the Range Rover starts to float down the river?" I asked Jason Beard, of Wasilla, Alaska. He nodded his head as he eyeballed the fast-moving waters we were about to enter. "Roll down the windows and take off your seatbelt." Check. "Go in at an angle motoring upstream, throttling at a steady pace." Got it. And, finally, "Exit the Rover quickly if you need to, pointing your feet downstream for the protection of your head, if you get carried away by the current."
    It was at this point I made the lightning-quick decision to exit his bone-stock 1992 Rover riding on 225/17s while I was on terra firma, and call my good friend "Gus" Gustafson to cross back across the Little Nelchina River for me, so I could photograph Beard traversing this glacial river from the top of Gustafson's stout tundra buggy. After all, I had just met Beard a couple hours earlier, and, despite the fact that he's a rabid Camel Trophy fan and has followed this legendary 4WD event over a number of years, I didn't really know him or his driving skills. Plus, memories of floating down a few rivers in a variety of vehicles on off-road adventures around the world began to flood my head.
    Photo 2/37   |   South Central Alaska Tundra Buggies 35
    It was also a great excuse to get some good shots from the buggy, which has tall and aggressive agricultural tires, a fording depth of more than 4 feet, and low-range gearing that could pull a gang of grizzly bears across this remote tundra in south-central Alaska. Beard had pulled out a tow strap, secured it to the front of the Rover, and draped it over the top of his roof rack. Clearly, he was bold and ready to navigate the river, even though it wasn't a part of our original plan.
    Photo 3/37   |   South Central Alaska Tundra Buggies 02
    We had contacted Beard through the Alaska4x4Network.com website and planned to meet him at the jumping-off point for the Eureka off-road trail system, located along the Glenn Highway in an unpopulated area northeast of Anchorage. This trail system offers a network of hundreds of miles of dirt track used year-round by off-roaders who play, camp, and hunt in this region with majestic views in every direction, riding vehicles with low-range gearing, including ATVs and snowmobiles.
    At the time, Beard's Range Rover rode on street tires and had no lift (both have been upgraded since), so he planned to join our group for a few hours of wheeling and sightseeing that would end when we reached the first of numerous river crossings. Beard would then head back to higher ground and camp in his vehicle with other wheelers at the trailhead.
    Photo 10/37   |   South Central Alaska Tundra Buggies 03
    Our group included Gustafson, a renowned four-wheeling enthusiast and buggy builder; and his friend Dan West, who is also a back-country specialist. The pair, from Talkeetna, Alaska, took me and Molly Perkins and Billy Brice of Manchester, Vermont, on an overnight camping trip into this remote locale to take in the scenery, see some wildlife, and learn a few 4WD skills in a land that becomes an off-road driving classroom as soon as you leave the pavement. Perkins and Brice love four-wheeling, but their experience had been limited to less challenging trails in the Green Mountain State.
    As we began our journey, our last glimpse of civilization was the Eureka Lodge, located along the winding two-lane strip of tarmac that ribbons east-west between Palmer and Glennallen. It offers inexpensive and hearty meals, camping supplies, fuel, and cursory lodging. After filling our bellies and downing the lodge's 25c coffee, we soon found ourselves in the hinterlands, sharing the landscape with thousands of migrating caribou, a grizzly bear or two, and eagles that soared on the wind currents above. We drank in the tundra terrain with its colorful wildflowers, alpine sedges, mosses, lichens, scrub brush, and the utterly gorgeous vistas of the Nelchina Glacier and the mountain ranges that surround this region: the Talkeetnas, Chugach, Wrangells, and the Alaska Range.
    Photo 11/37   |   South Central Alaska Tundra Buggies 01
    By the time we reached the overview that captured the braided collection of rivers weaving through the lowlands and the sliver of track in the far distance leading to our camping spot, Beard had bogged down a few times in deep mud. He had to be snatched forward or back, but had proven his heartiness, and our small group had bonded. As Gustafson pointed far beyond the "little Nell" and the Little and Big Oshetna Rivers, it was obvious Beard wanted to stay the course.
    Despite the small rubber underneath the Rover, Beard was successful in navigating crossing after crossing, and I soon gained the confidence to ride shotgun with him. As the day progressed and the water grew deeper, it was time for another lesson. When we reached a series of river crossings of biblical proportions, Gustafson and West ran each crossing to scout out the best line, checking for holes and buried treasure such as rocks, trees, and limbs. Returning for Beard and me, they would position their vehicles upstream and slightly off-angle to each other, blocking the raging current to create a hole for Beard to drive through. The Moses move soon became a choreographed dance and a part of the magic that delighted us as rivers of caribou dodged and weaved in front of us and on the hillsides around us.
    Photo 12/37   |   South Central Alaska Tundra Buggies 09
    Despite setting up our tents when it was still light out, we found our own "night" late in the evening, after a campside meal around Gustafson's hand-welded stove. While Perkins, Brice, and I were daunted by the enormous grizzly tracks threading through our campsite, we were exhausted by the day in the great outdoors and ready to rest so we could push the repeat button for our return trip the next day. Our local friends were unconcerned about sharing this spot with bears that can range up to 1000 pounds. Bears are simply part of the life in Alaska; we all hoped they were more interested in the caribou herd than in us.
    As we headed back to the tarmac and the lodge to enjoy another meal and more coffee, we had our blueprint for crossing the rivers. And Beard slipped chains over his tires, making easier going as we caravanned home. It was a classroom none of us would forget, and there would be stories to tell around other campfires for years to come about rivers of caribou, biblical water crossings, and the Moses move.

    The Tundra Buggies
    Bill Newman, of Eagle River, Alaska, is the spiritual father of the Newman Buggy that spawned a generation of functional vehicles for traveling the wilds of Alaska. Newman, a welder, and his son Ty designed and built a collection of buggy models that ranged from Spartan two-seaters to highly specialized, eight-passenger versions.
    Gus Gustafson and Diane Fox, who are now retired after working for the Alaska Public Transit System, built their own two-seater buggies and have made upgrades and improvements over the past two decades. They continue to use them on trips with family and friends, as well as on annual hunts.
    Photo 19/37   |   South Central Alaska Tundra Buggies 28
    On this trip, Gus drove Vince Burke's buggy, dubbed Squatty, because it sits lower than Diane's model. Both vehicles have more than 4 feet of ground clearance. Diane's buggy started with a Chevy Suburban frame, and is set up with a stock 350 engine, Turbo 400, and 205 New Process transfer case; 4-inch lift; a Dana 60 in the rear (70 in the front) with Detroit lockers; hydro-assist steering; Warn winches front and rear; and 21.5 x 16.1 Firestone Field and Road tires. Gus has set up a similar two-seater, but was driving Burke's model, which is similar to Diane's, but started as a Chevy S-10.

    SOURCES
    2 Broke 2 Play 4Wheelers Club
    www.alaska4x4network.com
    Photo 26/37   |   South Central Alaska Tundra Buggies 05
    Alaska OHV Trails Guide
    www.ohv.trailssource.com/alaska
    Eureka Lodge
    907/822-3808 www.eurekalodge.com


    Read more: http://www.trucktrend.com

    Ducati 749R – Ezikiel Dacanay


    04_08_2015_Ezikiel_749R_ducati_01
    Written by Martin Hodgson.
    Taking the cutting torch to a Ducati is not something you do lightly, when that Ducati is a limited run 749r homologation special it’s no wonder it took some time before the power tools spun into action. This is not Ezikiel Dacanay’s first Custom Duc having previously built a café racer out of a 1997 916 but that bike was lost to an accident and it would take a few swings and roundabouts to get to the bike you see before you.
    04_08_2015_Ezikiel_749R_ducati_02
    With a broken wrist and finger a result of the 916’s demise and a painful Helicopter ride to the hospital any man would be forgiven for giving it all away. But when he was back on his feet Ezikiel got straight back on the horse by purchasing a Ducati 749r No. 63 of 500, a little lady called Scarlett. The plan was to café it straight away, but how do you start cutting on a limited run Ducati, so with tinkering in his blood he picked up a cheap 1972 CB500 and turned it into a tasty little ride. But still Scarlett was winking at him, he tried selling her, but one too many tyre kickers sealed her fate. If she was to stay that long red dress from Bologna would have to go, this Ducati was going to be stripped back Cali style, more skin and a whole lot more attitude.
    04_08_2015_Ezikiel_749R_ducati_03
    The look of this Café Fighter is anything but what rolled off the production floor, gone are all the fairings that gave the 749 its distinctive sports bike lines and in its place all that is functional is on full display. To strip so much weight off an already lightweight bike only to add it straight back on would be counterproductive, so carbon fibre is added to the already factory parts. Rear hugger, front fender and timing covers are all carbon with the addition of a carbon belly pan one of the few additions over stock. With the factory subframe removed and replaced with a shorter and narrower aluminium item, a barely trimmed carbon fibre seat gives the rider a place to sit. With a single HID headlight and bikini style fairing giving the Ducati a whole new attitude.
    04_08_2015_Ezikiel_749R_ducati_04
    To help finance the build Ezikiel sold off a lot of the unused parts as he went, but one item that had to stay was the fuel tank. The 749r was given a special 18 litre item that was a first for a Ducati of this kind and not again repeated, homologating a machine for racing means getting it right the first time and perhaps Ducati was worried about the new engines fuel consumption. But it wasn’t to be a problem and what is left is one of the most unique tanks of the modern era. To further accentuate the lines of the tank and minimalist panel work the bike has been painted by Stan Carlsen Body Shop with some strategically placed graphics by OverWatchDesigns.com that has a touch of 1299 Panigale R.
    04_08_2015_Ezikiel_749R_ducati_05
    The engine Ducati pieced together for the 749r is not a garden variety 90 degree V-twin but the best of Bologna designed to take on the World SuperSport championship. Reduced stroke and an increased bore, 12.7:1 compression and large titanium valves enable the 748cc engine to operate at peak efficiency high in the rev range for extended periods of time. You could write an entire article on the engine itself but one thing that was discovered early by tuners was the fitment of an aftermarket pipe could achieve an extra 10bhp just like that and Ezikiel fitted up a reverse cone muffler to add the bonus ponies. With fuelling aided by a dyno tuned Power Commander III peak power is now romping away above 130bhp.
    04_08_2015_Ezikiel_749R_ducati_06
    If the 749 engine is special then the suspension and braking is even more so, Ohlins, Brembo and a whole host of factory special parts make this a race bike for the road. Up front the big O delivers a set of USD forks that are fully adjustable and hold radial Brembo calipers clamping twin 320mm discs. The rear end is composed of a box section competition swingarm that is light, stiff and features Superbike chain adjustment; all of which pivots on a Progressive linkage with fully adjustable Öhlins monoshock.
    04_08_2015_Ezikiel_749R_ducati_07
    Not finished there Ezikiel tidied up the electrics, rerouted some of the main wiring harness and fitted a Shorai Battery. To keep the Duc road legal and maintain its low weight the big factory brake and indicators are all replaced with small LED items. Then comes some of the big fruit, yes this baby has more tricks up its sleeve, the wheels are 10 spoke forged aluminium items that bring those scales down even further and with reduced unsprung weight comes all of the additional handling and braking benefits. But perhaps the pièce de résistance are those six straight cut gears and the race bred dry slipper clutch. Whether you’re clutchless shifting up the box or hammering the gears back as you brake hard for another bend the orchestral perfection and violent precision just make you want to do it over and over again!
    04_08_2015_Ezikiel_749R_ducati_08
    04_08_2015_Ezikiel_749R_ducati_09
    Having lost one Ducati to the road Gods, found temptation in a small Honda and then be drawn back and begged by the 749r to be modified the final result is a café fighter that couldn’t have been better built for the San Francisco roads if you tried. Life has a way though of making you jump through some hoops to get there, but Ezikiel has more than a few coast roads to carve to make up for the heart ache he suffered along the way.
    via PIPEBURN

    HARLEY-DAVIDSON STELLALPINA BY ROBERTO ROSSI


    Vintage.........