ACE CAFE RADIO

    mercredi 7 octobre 2015

    RESTERAMPE: HERMANN KÖPF’S DUCATI PANTAH 500



    Hang out at a few European motorcycle events, and you’re bound to run into Hermann Köpf. The shaggy-haired Munich-based photographer is the editor-in-chief of the exquisite magazine Craftrad—and a total petrolhead.
    When an informal Germany v France rivalry was set up at this year’s Glemseck 101 festival, Herr Köpf couldn’t help but put his name down. His steed: this pick-n-mix Ducati Pantah 500.

    Hermann actually started building the Pantah long before Glemseck (“to have a cheap and trashy vehicle that can also be used for flat tracking or similar nonsense,” he states). But between work and family life, it took him over a year to complete.


    With a garage full of carbureted Ducatis (like this 860 GTS), the Pantah was a logical choice. Hermann found a frame on eBay and an engine in the local classifieds, and got cracking on his resterampe* race bike.


    “The bike is completely built with spare parts I had lying around the garage, eBay shops and swap meet finds,” he says. “Using an original or complete bike to be stripped would have been stupid—even though the Pantah was never really a pretty bike.”






















    Up front, Hermann added the Showa upside-down forks, 17-inch wheel and Brembo brake setup from a Ducati Monster. The rear wheel’s an 18-inch unit from a Pantah SL. For maximum grip on everything from dirt tracks to drag strips, Pirelli’s dual-sport MT60 (front) and MT90 (rear) tires were chosen.

    The fuel tank’s a Mike Hailwood replica that had to be chopped and welded in places to make it fit the Pantah’s frame. The seat is literally an upholstered plank—it’s been made using a “top-notch” skateboard deck. Hermann looped the rear of the frame to match the curve of the kick tail.


    Hiding under the tank is a compact Lithium-ion battery. All the wiring’s been redone, and now runs inside the frame. The exhaust is a two-into-one Conti Sport system, and the airbox has made way for foam air filters.


    Believe it or not, the Pantah’s plated—thanks to barely-legal lights and tiny turn signals at both ends. There’s also a front fender, and an inner fender under the seat to keep muck from the back wheel out of the filters.

    Rearsets and Tommaselli MX handlebars were installed to give the Ducati a fairly neutral riding position. And the final livery is a basically a bunch of stickers slapped onto the busted-up blue tank—a perfect fit for the bike’s built-to-thrash vibe.

    Hermann only managed to squeeze in 30km on Rudi die resterampe before racing it at Glemseck—just enough for a quick carb tune. Still, he pitted it against Southsiders front man Vincent Pratt’s T120 Triton, and won…convincingly.

    “It is quite fast for a 500cc, and light,” he says. “The Triton had no chance.”
    *Resterampe refers to a well-known German store called Rudis Reste Rampe. ‘Reste’ means leftovers or discounted items, and ‘rampe’ is a ramp or chute.
    via BIKEexif

    DOWN & OUT CAFE RACERS TRIUMPH T100


    If you’ve met Shaun, boss man at Down & Out Cafe Racers, then you’ll know he isn’t the sort of chap to be caught adjusting his cravat in the mirror of a CG125 brat. Coming from a background in building choppers Shaun and his crew up in Barnsley, Yorkshire like their bikes to have a proper presence, stance and perhaps more importantly a proper finish.
    One of the perks of the job is that occasionally Shaun gets to build himself a bike, exactly how he wants it, without a customer’s requirements to adhere to. And if you recall the very first Bike Shed Event you’ll no doubt have noticed the peanut tanked, gold and white CB450 with a whopping 16″ Firestone squeezed between the fork legs that was next to the bar in the first arch. So it’s no surprise that some of the recent Triumphs to leave the workshop wear rather fat front ends. The Bike Shed London 2015 poster bike, yup, that was his last personal project.
    D&O 2For his latest T100 the old girl’s legs needed to be spread a bit wider to accept an exceptionally thick 17 incher. The adventure rider’s tyre of choice is Continental’s TKC 80, renowned for its capability off road but also its ability to offer decent grip on the black stuff. With 180 x 17s fitted front and rear this is not a bike for a retiring wallflower. To ensure he didn’t touch the sides Shaun entrusted Fastec Racing with the job of machining the oversize triple clamps to hold the 2011 CBR1000RR forks. The normal off-the-shelf D&O alloy mudguards weren’t wide enough to cover the TKCs so a mate’s English Wheel was borrowed to shape a pair, a very nice job too.
    D&O 3A Harley-Davidson hub was spaced out in the mounts and laced to a 5 1/2″ rim to accept the fat rubber while Triumph 1050 discs are gripped by the original Tokico radial 4-pots. The result is pretty spectacular, and before anyone starts moaning about turn-in, knobblies on a wet road etc let me pre-empt you. Bugger off! You’ve missed the point. It’s Shaun’s own bike and he wanted to to say Ayup, look at mi proper bike, not Hello, I’ve removed 0.75 degrees of rake to enhance corner entry and overall finesse of the front end feel. Apparently feelings are something us southerners get in our fingers when we clasp a glass of shandy that’s a bit too chilled.
    D&O 4Down & Out source their donor bikes from the horse’s mouth and circumvent the need to trawl the web, or worse, to find low mileage, nearly new or bikes straight off the nearby production line. That means more effort and budget can be put into upgrades rather than repairs. But not all components are expensive, CNC’d exotica. Shaun and right hand man Carl scratched there heads and rooted through the stock room for an exhaust solution, yet ended up tripping over this silencer at an auto jumble. Nice when it works out like that. Mated to a D&O stainless system the Hinckley twin sounded ripe at last weekend’s Distinguished Gentleman’s Ride in London.
    D&O 5If you’ve read the feature of the Bike Shed London 2015 poster bike then you know that for one there’s a deal of repetition on my part but also that Shaun likes a clean cockpit and goes to great lengths to get as close as possible to having just a set of bars and a couple of levers. German outfit LSL manufacture some tasty aftermarket products, so here we have their bars and risers, ignition relocation kit and billet brake fluid reservoir. A GSXR750 master cylinder and clutch perch with D&O levers further tidy the job whilst ensuring those radial callipers have enough welly behind them. Motone mini buttons replace the stock switchgear and all wiring is hidden within the bars.
    D&O 7The custom loom continues into the Bates style headlamp, mounted with trick, stainless bracketry which doubles up to house the very neat little indicators, again D&O own-brand. Despite their best wiring efforts though these modern Triumphs don’t take too kindly to having the clocks removed as all the factory fitted boffins will fall out and the ECU gets its knickers in a knot. Luckily ze clever Germans at Motogadget have a neat fix for this, the M-Tri allows for plug-and-play fitment of their range of mini speedos whilst allowing the bike to actually run.
    D&O 8Whilst leafing through the Motone parts catalogue a host of other snazzy parts were added, we’ll let you play spot the posh parts. Whilst the guys were fitting these, Pro Kustom started on the tank and JVB side panels. We’ve seen the matt black and silver up close, it’s a great finish and surprisingly resilient too. Slight side note to any jacket and jeans manufactures, keep sharp bits in your sewing machines and away from fuel tanks, cheers.
    D&O 6
    The guys are a dab hand at looping the subframes on Bonnies and in this case their handiwork is shown off by the stubby seat, keeping a bit more visual bulk towards the centre of the bike. Further burliness comes courtesy of a set of engine bars, not the usual fare of the custom builder but these look the business complete with the low slung pothole visualisation device. Shaun wanted to incorporate further practicality into his daily commuter so fabricated a stainless steel bracket to hold a canvas pannier and from here it looks like four bread cakes and a couple of bottles of Timothy Taylor’s will fit perfectly. Decent.
    D&O 9
    Down & Out are giving people exactly what they want and the order book reflects just that, so we reckon Shaun deserves a new company vehicle every now and again. Not only that, it doesn’t take a rocket surgeon to work out that not everyone is as experienced as Shaun and Carl, nor have the relevant facilities so why not offer bolt-on parts that arrive in the post, without the additional headache and hard work. That said, they’ll gladly put your name on the list and build the bike of your dreams.
    via The Bike Shed

    Snapshot, 1973: Helen Stewart shoots back


    During the 1973 Austrian Grand Prix, Helen Stewart shoots back at photographer Rainer W. Schlegelmilch, as her husband Jackie races to a second-place finish, edging one step closer to his third World Championship victory…
    Aviators, retro cameras, rose-gold watches and denim shirts – it’s certainly true that fashions go full circle. Helen Stewart would have enjoyed the race, as the Scotsman, who started from seventh on the grid in his Tyrell, drove an impressive race finishing only behind Ronnie Peterson’s Lotus. Just three races later, during practice for the season finale at Watkins Glen, Stewart – and the whole Formula 1 fraternity – would be rocked by the tragic death of his teammate François Cevert. Though he had already decided to retire at the end of the season (and wrapped up the Drivers’ title), Stewart and the Tyrell team pulled out of the race as a mark of respect. As a result, the International Cup for F1 Manufacturers was gifted to Lotus-Ford. 
    Photo: Rainer W. Schlegelmilch/Getty

    Triumph.........